Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Eagle Compression Shop and Office

411 South Grandview Ave, Odessa, TX 79761, Odessa, TX, 79761

Eagle Compression Shop and Office is a new construction project at 411 South Grandview Ave, Odessa, in Ector County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $460K across about 6,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2020006657

$460K

Project Value

6,000

Square Feet

$77/sqft

Cost/SqFt

9 months

Duration

Registered:Dec 4, 2019

Start:Jan 15, 2020

Target:Oct 1, 2020

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 79761 (Odessa)

One email per change. Unsubscribe in one click. Privacy.

Eagle Compression Shop and Office is a New Construction project located at 411 South Grandview Ave, Odessa, TX 79761 in Odessa, Texas. The project has an estimated value of $460K covering 6,000 sq ft. Jeff Butler is the property owner and THE PATINO GROUP LLC is the design firm of record. The project was registered with TDLR on December 4, 2019.

❓Frequently Asked Questions

What is Eagle Compression Shop and Office?

Eagle Compression Shop and Office is a new construction project at 411 South Grandview Ave in Odessa, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: new office and shop

Is Eagle Compression Shop and Office open in Odessa?

Eagle Compression Shop and Office is currently under construction in Odessa, TX. Its current TDLR status is "Project Registered".

Where is Eagle Compression Shop and Office located?

Eagle Compression Shop and Office is located at 411 South Grandview Ave, Odessa, TX, 79761, in Ector County.

Who is the owner or developer of Eagle Compression Shop and Office?

Jeff Butler is the property owner/developer of record for Eagle Compression Shop and Office, per its TDLR project registration.

Who is the architect or design firm for Eagle Compression Shop and Office?

THE PATINO GROUP LLC is the design firm of record for Eagle Compression Shop and Office, according to its TDLR filing.

How much does Eagle Compression Shop and Office cost and how big is it?

Eagle Compression Shop and Office has an estimated construction value of $460K and approximately 6,000 square feet (about $77/sqft), based on its TDLR filing.

📋Scope of Work

new office and shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.