Construction complete · Nov 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Caliber Collision

202 S Ryan Dr., Red Oak, TX 75154, Red Oak, TX, 75154

Caliber Collision is a new construction project at 202 S Ryan Dr., Red Oak, in Ellis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2020). The project has an estimated value of $950K across about 14,600 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020013501

$950K

Project Value

14,600

Square Feet

$65/sqft

Cost/SqFt

7 months

Duration

Registered:Mar 11, 2020

Start:May 1, 2020

Target:Nov 30, 2020

🏁

Project Closed

Project has been completed and closed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 75154 (Red Oak)

One email per change. Unsubscribe in one click. Privacy.

Caliber Collision is a New Construction project located at 202 S Ryan Dr., Red Oak, TX 75154 in Red Oak, Texas. The project has an estimated value of $950K covering 14,600 sq ft. Tim Kraftson is the property owner and GALLUP ARCHITECTS is the design firm of record. The project was registered with TDLR on March 11, 2020.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a new construction project at 202 S Ryan Dr. in Red Oak, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Caliber Collision autobody shop. CMU loadbearing walls with steel roof structure.

Is Caliber Collision open in Red Oak?

Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Nov 2020. The building is finished and very likely open.

Where is Caliber Collision located?

Caliber Collision is located at 202 S Ryan Dr., Red Oak, TX, 75154, in Ellis County.

Who is the owner or developer of Caliber Collision?

Tim Kraftson is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

GALLUP ARCHITECTS is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $950K and approximately 14,600 square feet (about $65/sqft), based on its TDLR filing.

📋Scope of Work

New Caliber Collision autobody shop. CMU loadbearing walls with steel roof structure.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.