Library 1st Floor FabLab Work Shop Expansion
Library 1st Floor FabLab Work Shop Expansion is a renovation/alteration project at 702 Planetarium Place, Arlington, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2020). The project has an estimated value of $258K across about 1,385 sq ft.
📊Project Metrics
TDLR #TABS2020016065Project Closed
Project has been completed and closed
Library 1st Floor FabLab Work Shop Expansion is a Renovation/Alteration project located at 702 Planetarium Place, Arlington, TX 76019 in Arlington, Texas. The project has an estimated value of $258K covering 1,385 sq ft. University of Texas at Arlington is the property owner and University of Texas at Arlington is the design firm of record. The project was registered with TDLR on April 22, 2020.
❓Frequently Asked Questions
What is Library 1st Floor FabLab Work Shop Expansion?
Library 1st Floor FabLab Work Shop Expansion is a renovation/alteration project at 702 Planetarium Place in Arlington, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Expand the FabLab work space on 1st Floor west, one column bay; building a room in the shipping/receiving area for the air compressors relocation; and install a new AC unit outside of the building on east side for work shop expansion
Is Library 1st Floor FabLab Work Shop Expansion open in Arlington?
Construction on Library 1st Floor FabLab Work Shop Expansion is complete — TDLR records show the project passed its required accessibility inspection in Jul 2020. The building is finished and very likely open.
Where is Library 1st Floor FabLab Work Shop Expansion located?
Library 1st Floor FabLab Work Shop Expansion is located at 702 Planetarium Place, Arlington, TX, 76019, in Tarrant County.
Who is the owner or developer of Library 1st Floor FabLab Work Shop Expansion?
University of Texas at Arlington is the property owner/developer of record for Library 1st Floor FabLab Work Shop Expansion, per its TDLR project registration.
Who is the architect or design firm for Library 1st Floor FabLab Work Shop Expansion?
University of Texas at Arlington is the design firm of record for Library 1st Floor FabLab Work Shop Expansion, according to its TDLR filing.
How much does Library 1st Floor FabLab Work Shop Expansion cost and how big is it?
Library 1st Floor FabLab Work Shop Expansion has an estimated construction value of $258K and approximately 1,385 square feet (about $186/sqft), based on its TDLR filing.
📋Scope of Work
Expand the FabLab work space on 1st Floor west, one column bay; building a room in the shipping/receiving area for the air compressors relocation; and install a new AC unit outside of the building on east side for work shop expansion
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Apr 22, 2020
Review Complete
Inspection Complete
Closed
Jul 31, 2020