Construction complete · Oct 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Reynolds & Reynolds Mech. Bldg

6900 Hollister St, Houston, TX 77040, Houston, TX, 77040

Reynolds & Reynolds Mech. Bldg is a new construction project at 6900 Hollister St, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2022). The project has an estimated value of $2.0M across about 4,266 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020017521

$2.0M

Project Value

4,266

Square Feet

$469/sqft

Cost/SqFt

2 years

Duration

Registered:May 18, 2020

Start:Oct 22, 2020

Target:Oct 21, 2022

🏁

Project Closed

Project has been completed and closed

Reynolds & Reynolds Mech. Bldg is a New Construction project located at 6900 Hollister St, Houston, TX 77040 in Houston, Texas. The project has an estimated value of $2.0M covering 4,266 sq ft. Clay Development is the property owner and Carla R. Haramboure is the design firm of record. The project was registered with TDLR on May 18, 2020.

❓Frequently Asked Questions

What is Reynolds & Reynolds Mech. Bldg?

Reynolds & Reynolds Mech. Bldg is a new construction project at 6900 Hollister St in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: NEW MECHANICAL BUILDING FOR OFFICE CHILLER AND BOILER ROOM

Is Reynolds & Reynolds Mech. Bldg open in Houston?

Construction on Reynolds & Reynolds Mech. Bldg is complete — TDLR records show the project passed its required accessibility inspection in Oct 2022. The building is finished and very likely open.

Where is Reynolds & Reynolds Mech. Bldg located?

Reynolds & Reynolds Mech. Bldg is located at 6900 Hollister St, Houston, TX, 77040, in Harris County.

Who is the owner or developer of Reynolds & Reynolds Mech. Bldg?

Clay Development is the property owner/developer of record for Reynolds & Reynolds Mech. Bldg, per its TDLR project registration.

Who is the architect or design firm for Reynolds & Reynolds Mech. Bldg?

Carla R. Haramboure is the design firm of record for Reynolds & Reynolds Mech. Bldg, according to its TDLR filing.

How much does Reynolds & Reynolds Mech. Bldg cost and how big is it?

Reynolds & Reynolds Mech. Bldg has an estimated construction value of $2.0M and approximately 4,266 square feet (about $469/sqft), based on its TDLR filing.

📋Scope of Work

NEW MECHANICAL BUILDING FOR OFFICE CHILLER AND BOILER ROOM

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.