Funding type
This project is privately funded, on private land for private use.
Caliber Collision
3416 W. Loop 306, San Angelo, TX, 76904
Caliber Collision is a new construction project at 3416 W. Loop 306, San Angelo, in Tom Green County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2021). The project has an estimated value of $1.9M across about 11,615 sq ft.
- Estimated project value
- $1.9M
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 11,615 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $164/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 1y 2mo
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
4 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
49 days after the preceding date shown.
Source: TDLR filing
View source recordProject closed · TDLR filing
The project record was closed in TDLR.
411 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
Same day as the preceding date shown.
Source: TDLR filing
View source record
📰About Caliber Collision
Caliber Collision-San Angelo is a new auto repair facility located at 3416 W. Loop 306 in San Angelo, Texas. The project, registered with TDLR in August 2020, involved the construction of an 11,615 sq ft building on private land in Tom Green County. Cross Development served as the owner of record for this privately funded development.
Project Scope and Cost
The estimated cost for this new construction was $1,900,000, resulting in a computed cost of $164 per square foot. This figure is above the county median of $130 per square foot for similar new construction filings in Tom Green County. The scheduled build window of 411 days was longer than the county median of 218 days, reflecting the scale of the facility.
NCA Partners-Architecture was the design firm of record for the project. The registered accessibility specialist was Brandon Mark Quimbey. Construction began in October 2020, and the filing indicated a completion date of November 2021. TDLR closed the project file in November 2021, which marks the end of the accessibility review process for this construction.
Regional Context
Cross Development has registered six other projects with TDLR, totaling $39,100,000. These include facilities in Terrell, Denison, and San Antonio. NCA Partners-Architecture has also worked on six other TDLR-registered projects, including a large facility in Benbrook.
For context, the U.S. Census ACS 2023 five-year estimates for ZIP code 76904 indicate a population of about 36,444 and a median household income of $79,617. The area has 16,812 housing units, with a median owner-occupied home value of $266,800. Housing in this area is mostly owner-occupied. Tom Green County unemployment was 3.9 percent in June 2026, higher than a year earlier.
Project Closed
Project has been completed and closed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 76904 (San Angelo)
One email per change. Unsubscribe in one click. Privacy.
Caliber Collision is a New Construction project located at 3416 W. Loop 306, San Angelo, TX 76904 in San Angelo, Texas. The project has an estimated value of $1.9M covering 11,615 sq ft. Cross Development is the property owner and NCA Partners-Architecture is the design firm of record. The project was registered with TDLR on August 27, 2020.
Frequently Asked Questions
Is the Caliber Collision facility in San Angelo open?
The TDLR record shows the project file closed in November 2021. Third-party listings such as Yelp and Yahoo Local list a Caliber Collision location at 1909 W Beauregard Ave, but the specific status of the W. Loop 306 facility is not stated in the provided facts.
Who developed the Caliber Collision project at 3416 W. Loop 306?
Cross Development is listed as the owner and developer of record for this project. The design firm of record was NCA Partners-Architecture.
What was the estimated cost of the new auto repair facility?
The estimated cost for the new construction was $1,900,000. This equates to $164 per square foot for the 11,615 sq ft building.
When did construction on the San Angelo facility start and end?
Construction started in October 2020. The filing indicated a completion date of November 2021, and TDLR closed the project file in that month.
What is Caliber Collision?
Caliber Collision is a new construction project at 3416 W. Loop 306 in San Angelo, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Auto repair facility
Is Caliber Collision open in San Angelo?
Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Nov 2021. The building is finished and very likely open.
Where is Caliber Collision located?
Caliber Collision is located at 3416 W. Loop 306, San Angelo, TX, 76904, in Tom Green County.
Who is the owner or developer of Caliber Collision?
Cross Development is the property owner/developer of record for Caliber Collision, per its TDLR project registration.
Who is the architect or design firm for Caliber Collision?
NCA Partners-Architecture is the design firm of record for Caliber Collision, according to its TDLR filing.
How much does Caliber Collision cost and how big is it?
Caliber Collision has an estimated construction value of $1.9M and approximately 11,615 square feet (about $164/sqft), based on its TDLR filing.
Scope of Work
New Auto repair facility
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
3416 W. Loop 306, San Angelo, TX, 76904
Related Projects
Same Owner
$145.9M totalWatch all construction in 76904 (San Angelo)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in San Angelo?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.