Slaughter Lane Corridor IDIQ Segment C4
Slaughter Lane Corridor IDIQ Segment C4 is a renovation/alteration project at 150 -1900 Slaughter Lane, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2022). The project has an estimated value of $1.9M across about 95,000 sq ft.
📊Project Metrics
TDLR #TABS2021004685Inspection Complete
Final inspection completed, awaiting project closure
Slaughter Lane Corridor IDIQ Segment C4 is a Renovation/Alteration project located at 150 -1900 Slaughter Lane, Austin, TX 78748 in Austin, Texas. The project has an estimated value of $1.9M covering 95,000 sq ft. City of Austin, Austin Transportation Dept. is the property owner and AECOM is the design firm of record. The project was registered with TDLR on November 19, 2020.
❓Frequently Asked Questions
What is Slaughter Lane Corridor IDIQ Segment C4?
Slaughter Lane Corridor IDIQ Segment C4 is a renovation/alteration project at 150 -1900 Slaughter Lane in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Bicycle and Pedestrian Improvement Project. Proposed improvements consist of the addition and/or realignment of 5’ wide sidewalks along both sides of the roadway, and 6.5'+ protected bike lanes with new bike median curb. Pedestrian ramps…
Is Slaughter Lane Corridor IDIQ Segment C4 open in Austin?
Construction on Slaughter Lane Corridor IDIQ Segment C4 is complete — TDLR records show the project passed its required accessibility inspection in Aug 2022. The building is finished and very likely open.
Where is Slaughter Lane Corridor IDIQ Segment C4 located?
Slaughter Lane Corridor IDIQ Segment C4 is located at 150 -1900 Slaughter Lane, Austin, TX, 78748, in Travis County.
Who is the owner or developer of Slaughter Lane Corridor IDIQ Segment C4?
City of Austin, Austin Transportation Dept. is the property owner/developer of record for Slaughter Lane Corridor IDIQ Segment C4, per its TDLR project registration.
Who is the architect or design firm for Slaughter Lane Corridor IDIQ Segment C4?
AECOM is the design firm of record for Slaughter Lane Corridor IDIQ Segment C4, according to its TDLR filing.
How much does Slaughter Lane Corridor IDIQ Segment C4 cost and how big is it?
Slaughter Lane Corridor IDIQ Segment C4 has an estimated construction value of $1.9M and approximately 95,000 square feet (about $20/sqft), based on its TDLR filing.
📋Scope of Work
Bicycle and Pedestrian Improvement Project. Proposed improvements consist of the addition and/or realignment of 5’ wide sidewalks along both sides of the roadway, and 6.5'+ protected bike lanes with new bike median curb. Pedestrian ramps and driveway
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Nov 19, 2020
Review Complete
Inspection Complete
Aug 1, 2022
Closed
🔗Related Projects
👤Same Owner
$22.4M total📄Related City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work **CYNTHIA REYES: Replace existing 3.5-ton vertical gas furnace and associated HVAC system with like-for-like equipment; no structural change.
Construct new driveway approach of 19 FT. No sidewalk inspection per plan review.
T-pole Ref: 2026-080109 BP
Addition of 2nd story to existing single family residence. Interior remodel of the 1st floor.
Construct new sidewalk of 720 LF SP-2020-0289C 2022 059967 000 00 SSI