Construction complete · May 2021🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Equinix Opsflex 3

1990 N. Stemmons Fwy., Dallas, TX 75207, Dallas, TX, 75207

Equinix Opsflex 3 is a renovation/alteration project at 1990 N. Stemmons Fwy., Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2021). The project has an estimated value of $780K across about 6,703 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021005141

$780K

Project Value

6,703

Square Feet

$116/sqft

Cost/SqFt

5 months

Duration

Registered:Nov 30, 2020

Start:Dec 18, 2020

Target:May 5, 2021

🏁

Project Closed

Project has been completed and closed

Equinix Opsflex 3 is a Renovation/Alteration project located at 1990 N. Stemmons Fwy., Dallas, TX 75207 in Dallas, Texas. The project has an estimated value of $780K covering 6,703 sq ft. Equinix is the property owner and Gensler is the design firm of record. The project was registered with TDLR on November 30, 2020.

❓Frequently Asked Questions

What is Equinix Opsflex 3?

Equinix Opsflex 3 is a renovation/alteration project at 1990 N. Stemmons Fwy. in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: construction of interior suite of rooms on 3rd level

Is Equinix Opsflex 3 open in Dallas?

Construction on Equinix Opsflex 3 is complete — TDLR records show the project passed its required accessibility inspection in May 2021. The building is finished and very likely open.

Where is Equinix Opsflex 3 located?

Equinix Opsflex 3 is located at 1990 N. Stemmons Fwy., Dallas, TX, 75207, in Dallas County.

Who is the owner or developer of Equinix Opsflex 3?

Equinix is the property owner/developer of record for Equinix Opsflex 3, per its TDLR project registration.

Who is the architect or design firm for Equinix Opsflex 3?

Gensler is the design firm of record for Equinix Opsflex 3, according to its TDLR filing.

How much does Equinix Opsflex 3 cost and how big is it?

Equinix Opsflex 3 has an estimated construction value of $780K and approximately 6,703 square feet (about $116/sqft), based on its TDLR filing.

📋Scope of Work

construction of interior suite of rooms on 3rd level

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.