Construction complete · May 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

DTTP - R32 Lab

19001 Kermier Rd, Waller, TX 77484, Waller, TX, 77484

DTTP - R32 Lab is a new construction project at 19001 Kermier Rd, Waller, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2021). The project has an estimated value of $500K across about 720 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021005879

$500K

Project Value

720

Square Feet

$694/sqft

Cost/SqFt

1y 5mo

Duration

Registered:Dec 11, 2020

Start:Jan 1, 2020

Target:May 31, 2021

🏁

Project Closed

Project has been completed and closed

DTTP - R32 Lab is a New Construction project located at 19001 Kermier Rd, Waller, TX 77484 in Waller, Texas. The project has an estimated value of $500K covering 720 sq ft. Daikin is the property owner and Inventure is the design firm of record. The project was registered with TDLR on December 11, 2020.

❓Frequently Asked Questions

What is DTTP - R32 Lab?

DTTP - R32 Lab is a new construction project at 19001 Kermier Rd in Waller, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New 720sf pre-engineered metal building for production testing.

Is DTTP - R32 Lab open in Waller?

Construction on DTTP - R32 Lab is complete — TDLR records show the project passed its required accessibility inspection in May 2021. The building is finished and very likely open.

Where is DTTP - R32 Lab located?

DTTP - R32 Lab is located at 19001 Kermier Rd, Waller, TX, 77484, in Harris County.

Who is the owner or developer of DTTP - R32 Lab?

Daikin is the property owner/developer of record for DTTP - R32 Lab, per its TDLR project registration.

Who is the architect or design firm for DTTP - R32 Lab?

Inventure is the design firm of record for DTTP - R32 Lab, according to its TDLR filing.

How much does DTTP - R32 Lab cost and how big is it?

DTTP - R32 Lab has an estimated construction value of $500K and approximately 720 square feet (about $694/sqft), based on its TDLR filing.

📋Scope of Work

New 720sf pre-engineered metal building for production testing.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.