Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

MECANIC SHOP AT CULVER STREET

9226 CULVER STREET, Houston, TX 77051, Houston, TX, 77051

MECANIC SHOP AT CULVER STREET is a new construction project at 9226 CULVER STREET, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $232K across about 1,920 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021008054

$232K

Project Value

1,920

Square Feet

$121/sqft

Cost/SqFt

2y 3mo

Duration

Registered:Jan 22, 2021

Start:Feb 15, 2021

Target:Apr 28, 2023

📝

Review Complete

Design review complete, construction may proceed

MECANIC SHOP AT CULVER STREET is a New Construction project located at 9226 CULVER STREET, Houston, TX 77051 in Houston, Texas. The project has an estimated value of $232K covering 1,920 sq ft. JOE BASSIL is the property owner and CIVE.INC is the design firm of record. The project was registered with TDLR on January 22, 2021.

❓Frequently Asked Questions

What is MECANIC SHOP AT CULVER STREET?

MECANIC SHOP AT CULVER STREET is a new construction project at 9226 CULVER STREET in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: NEW GROUND-UP, PRE-ENGINEERING METAL BUILDING, CONCRETE FOUNDATION, SINGLE-STORY , (INSULATED) ROOF TO BE A MECHANIC SHOP

Is MECANIC SHOP AT CULVER STREET open in Houston?

MECANIC SHOP AT CULVER STREET is currently under construction in Houston, TX. Its current TDLR status is "Review Complete".

Where is MECANIC SHOP AT CULVER STREET located?

MECANIC SHOP AT CULVER STREET is located at 9226 CULVER STREET, Houston, TX, 77051, in Harris County.

Who is the owner or developer of MECANIC SHOP AT CULVER STREET?

JOE BASSIL is the property owner/developer of record for MECANIC SHOP AT CULVER STREET, per its TDLR project registration.

Who is the architect or design firm for MECANIC SHOP AT CULVER STREET?

CIVE.INC is the design firm of record for MECANIC SHOP AT CULVER STREET, according to its TDLR filing.

How much does MECANIC SHOP AT CULVER STREET cost and how big is it?

MECANIC SHOP AT CULVER STREET has an estimated construction value of $232K and approximately 1,920 square feet (about $121/sqft), based on its TDLR filing.

📋Scope of Work

NEW GROUND-UP, PRE-ENGINEERING METAL BUILDING, CONCRETE FOUNDATION, SINGLE-STORY , (INSULATED) ROOF TO BE A MECHANIC SHOP

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.