Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Danieldale Finishout

2001 Danieldale Road, Lancaster, TX 75134, Lancaster, TX, 75134

Danieldale Finishout is a renovation/alteration project at 2001 Danieldale Road, Lancaster, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.1M across about 237,600 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021014794

$1.1M

Project Value

237,600

Square Feet

$5/sqft

Cost/SqFt

3 months

Duration

Registered:May 4, 2021

Start:Jun 1, 2021

Target:Sep 1, 2021

📝

Review Complete

Design review complete, construction may proceed

Danieldale Finishout is a Renovation/Alteration project located at 2001 Danieldale Road, Lancaster, TX 75134 in Lancaster, Texas. The project has an estimated value of $1.1M covering 237,600 sq ft. CSHV 20 35 LLC is the property owner and Burns & McDonnell is the design firm of record. The project was registered with TDLR on May 4, 2021.

❓Frequently Asked Questions

What is Danieldale Finishout?

Danieldale Finishout is a renovation/alteration project at 2001 Danieldale Road in Lancaster, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of a door manufacturing line within a shell space. Internal buildout of a 1,000 sf office and a 2,785 SF break area.

Is Danieldale Finishout open in Lancaster?

Danieldale Finishout is currently under construction in Lancaster, TX. Its current TDLR status is "Review Complete".

Where is Danieldale Finishout located?

Danieldale Finishout is located at 2001 Danieldale Road, Lancaster, TX, 75134, in Dallas County.

Who is the owner or developer of Danieldale Finishout?

CSHV 20 35 LLC is the property owner/developer of record for Danieldale Finishout, per its TDLR project registration.

Who is the architect or design firm for Danieldale Finishout?

Burns & McDonnell is the design firm of record for Danieldale Finishout, according to its TDLR filing.

How much does Danieldale Finishout cost and how big is it?

Danieldale Finishout has an estimated construction value of $1.1M and approximately 237,600 square feet (about $5/sqft), based on its TDLR filing.

📋Scope of Work

Installation of a door manufacturing line within a shell space. Internal buildout of a 1,000 sf office and a 2,785 SF break area.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.