Funding type
This project is privately funded, on private land for private use.
CE+T in Austin, TX
2500 S HWY 183 #670 Building 6, Austin, TX, 78744
CE+T is a renovation/alteration project at 2500 S HWY 183 #670 Building 6, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2022). The project has an estimated value of $190K across about 3,000 sq ft.
- Estimated project value
- $190K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 3,000 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $63/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 9 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
4 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
26 days after the preceding date shown.
Source: TDLR filing
View source recordProject closed · TDLR filing
The project record was closed in TDLR.
274 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
Same day as the preceding date shown.
Source: TDLR filing
View source record
Project Closed
Project has been completed and closed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78744 (Austin)
One email per change. Unsubscribe in one click. Privacy.
CE+T is a Renovation/Alteration project located at 2500 S HWY 183 #670 Building 6, Austin, TX 78744 in Austin, Texas. The project has an estimated value of $190K covering 3,000 sq ft. 2500 HWY 183 LP is the property owner and L M Holder III FAIA is the design firm of record. The project was registered with TDLR on May 5, 2021.
Frequently Asked Questions
What is CE+T?
CE+T is a renovation/alteration project at 2500 S HWY 183 #670 Building 6 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior finish-out of suite, electrical and expanded HVAC.
Is CE+T open in Austin?
Construction on CE+T is complete — TDLR records show the project passed its required accessibility inspection in Mar 2022. The building is finished and very likely open.
Where is CE+T located?
CE+T is located at 2500 S HWY 183 #670 Building 6, Austin, TX, 78744, in Travis County.
Who is the owner or developer of CE+T?
2500 HWY 183 LP is the property owner/developer of record for CE+T, per its TDLR project registration.
Who is the architect or design firm for CE+T?
L M Holder III FAIA is the design firm of record for CE+T, according to its TDLR filing.
How much does CE+T cost and how big is it?
CE+T has an estimated construction value of $190K and approximately 3,000 square feet (about $63/sqft), based on its TDLR filing.
Scope of Work
Interior finish-out of suite, electrical and expanded HVAC.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
2500 S HWY 183 #670 Building 6, Austin, TX, 78744
Explore the supplied address
A precise map point has not been loaded. Choose to look up the address, or open it in Google Maps using the link below.
Related Projects
Related City Permits
Building permits found at or near this location
Installation of one (1) set of Non-illuminated Reverse Channel Letters w/backplate wire way mounted.
Bldg 3 Unit 370- NEW ABOVE-GROUND LP (PROPANE) GAS PIPING INSTALLATION COMMERCIAL ROASTING EQUIPMENT. This is a standalone new-work trade permit (gas piping) NOT a repair permit. No existing gas piping is being repaired replaced or altered; this is new piping to a newly installed appliance. PURPOSE: Install new above-ground LP gas piping to supply a commercial coffee roaster (IMF RM-15A_STD manufacturer data sheet Doc ST_00) inside the modular building at this address. Piping runs from the roasters gas train inlet connection to a new exterior termination stub at the rear exterior wall of the modular building. The exterior stub is a dead-end termination point only valved and capped for future connection by the propane supplier. Contractor scope ends at the exterior stub; it does NOT include the propane tank exterior regulators or any underground/trenched piping from the tank to the stub; that work is performed separately by the propane supply company. WORK DIMENSIONS: Total piping run approximately 25 to 35 feet (35 ft design basis) routed above ground through the rear interior of the modular building to an exterior wall penetration terminating at an exterior stub at the rear of the building. Pipe size: 3/4 in nominal Schedule 40 black steel trunk line reduced to 1/2 in NPT at the roasters gas train connection. Scope includes: pipe sizing and installation appliance shutoff valve at the roaster union sediment trap (drip leg) wall penetration with sleeve and seal exterior stub termination (valved and capped) pressure test and leak test of all new piping and coordination of required city inspections. No underground piping by the applicant. APPLIANCE DIMENSIONS AND SPECS (IMF RM-15A_STD data sheet): Overall dimensions 87.16 in L x 41.73 in W x 76.45 in H; weight 1433 lb (650 kg); burner Riello Gulliver BS1F LPG; maximum thermal input 178000 BTU/hr; LPG consumption 8.4 lb/hr; required inlet pressure minimum 12 in WC maximum 48 in WC; gas train connection 1/2 in; c
ePlan: Residential Expedited Review - New Autofill/Heated pool.
Replacement of an existing water heater 40 gallon water heater change out 2500 Berkett Dr A Austin TX 78745
BASE: Installing a backup battery system and additional meter socket.
Watch all construction in 78744 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Austin?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.