Construction complete · Feb 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Engraving Concepts

302 Odyssey Drive, Webster, TX 77598, Webster, TX, 77598

Engraving Concepts is a new construction project at 302 Odyssey Drive, Webster, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2022). The project has an estimated value of $865K across about 5,040 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021019576

$865K

Project Value

5,040

Square Feet

$172/sqft

Cost/SqFt

7 months

Duration

Registered:Jul 12, 2021

Start:Jul 15, 2021

Target:Feb 1, 2022

🏁

Project Closed

Project has been completed and closed

Engraving Concepts is a New Construction project located at 302 Odyssey Drive, Webster, TX 77598 in Webster, Texas. The project has an estimated value of $865K covering 5,040 sq ft. Odyssey Park LLC is the property owner and Wycoff Development is the design firm of record. The project was registered with TDLR on July 12, 2021.

❓Frequently Asked Questions

What is Engraving Concepts?

Engraving Concepts is a new construction project at 302 Odyssey Drive in Webster, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction of a 5040 sq ft office/warehouse.

Is Engraving Concepts open in Webster?

Construction on Engraving Concepts is complete — TDLR records show the project passed its required accessibility inspection in Feb 2022. The building is finished and very likely open.

Where is Engraving Concepts located?

Engraving Concepts is located at 302 Odyssey Drive, Webster, TX, 77598, in Harris County.

Who is the owner or developer of Engraving Concepts?

Odyssey Park LLC is the property owner/developer of record for Engraving Concepts, per its TDLR project registration.

Who is the architect or design firm for Engraving Concepts?

Wycoff Development is the design firm of record for Engraving Concepts, according to its TDLR filing.

How much does Engraving Concepts cost and how big is it?

Engraving Concepts has an estimated construction value of $865K and approximately 5,040 square feet (about $172/sqft), based on its TDLR filing.

📋Scope of Work

New construction of a 5040 sq ft office/warehouse.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.