Construction complete · Mar 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Fletcher Hardware

Vine Street & FM 120, Pottsboro, TX 75076, Pottsboro, TX, 75076

Fletcher Hardware is a new construction project at Vine Street & FM 120, Pottsboro, in Grayson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2022). The project has an estimated value of $1.9M across about 14,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2022002056

$1.9M

Project Value

14,000

Square Feet

$136/sqft

Cost/SqFt

4 months

Duration

Registered:Sep 30, 2021

Start:Nov 1, 2021

Target:Mar 1, 2022

🏁

Project Closed

Project has been completed and closed

Fletcher Hardware is a New Construction project located at Vine Street & FM 120, Pottsboro, TX 75076 in Pottsboro, Texas. The project has an estimated value of $1.9M covering 14,000 sq ft. JTF Properties is the property owner and David Baca Studio, LLC dba BACA is the design firm of record. The project was registered with TDLR on September 30, 2021.

❓Frequently Asked Questions

What is Fletcher Hardware?

Fletcher Hardware is a new construction project at Vine Street & FM 120 in Pottsboro, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New single-story 14,000 square foot commercial building.

Is Fletcher Hardware open in Pottsboro?

Construction on Fletcher Hardware is complete — TDLR records show the project passed its required accessibility inspection in Mar 2022. The building is finished and very likely open.

Where is Fletcher Hardware located?

Fletcher Hardware is located at Vine Street & FM 120, Pottsboro, TX, 75076, in Grayson County.

Who is the owner or developer of Fletcher Hardware?

JTF Properties is the property owner/developer of record for Fletcher Hardware, per its TDLR project registration.

Who is the architect or design firm for Fletcher Hardware?

David Baca Studio, LLC dba BACA is the design firm of record for Fletcher Hardware, according to its TDLR filing.

How much does Fletcher Hardware cost and how big is it?

Fletcher Hardware has an estimated construction value of $1.9M and approximately 14,000 square feet (about $136/sqft), based on its TDLR filing.

📋Scope of Work

New single-story 14,000 square foot commercial building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.