Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

iCode

8810 Woodway Drive, Suite 42, Waco, TX 76712, Waco, TX, 76712

iCode is a renovation/alteration project at 8810 Woodway Drive, Suite 42, Waco, in McLennan County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $90K across about 2,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2022013618

$90K

Project Value

2,000

Square Feet

$45/sqft

Cost/SqFt

2 months

Duration

Registered:Mar 9, 2022

Start:Mar 14, 2022

Target:May 25, 2022

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 76712 (Waco)

One email per change. Unsubscribe in one click. Privacy.

iCode is a Renovation/Alteration project located at 8810 Woodway Drive, Suite 42, Waco, TX 76712 in Waco, Texas. The project has an estimated value of $90K covering 2,000 sq ft. TRAVIS BURNET PARTNERS LP is the property owner and Blackstock Alessandri Associates, Llc is the design firm of record. The project was registered with TDLR on March 9, 2022.

❓Frequently Asked Questions

What is iCode?

iCode is a renovation/alteration project at 8810 Woodway Drive, Suite 42 in Waco, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: lease space buildout

Is iCode open in Waco?

iCode is currently under construction in Waco, TX. Its current TDLR status is "Project Registered".

Where is iCode located?

iCode is located at 8810 Woodway Drive, Suite 42, Waco, TX, 76712, in McLennan County.

Who is the owner or developer of iCode?

TRAVIS BURNET PARTNERS LP is the property owner/developer of record for iCode, per its TDLR project registration.

Who is the architect or design firm for iCode?

Blackstock Alessandri Associates, Llc is the design firm of record for iCode, according to its TDLR filing.

How much does iCode cost and how big is it?

iCode has an estimated construction value of $90K and approximately 2,000 square feet (about $45/sqft), based on its TDLR filing.

📋Scope of Work

lease space buildout

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.