Construction complete · Dec 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Allsup's Whitney NT1

810 S. Colorado Street, Whitney, TX 64105, Whitney, TX, 64105

Allsup's Whitney NT1 is a new construction project at 810 S. Colorado Street, Whitney, in Hill County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2022). The project has an estimated value of $800K across about 6,277 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2022020335

$800K

Project Value

6,277

Square Feet

$127/sqft

Cost/SqFt

3 months

Duration

Registered:Jun 1, 2022

Start:Aug 29, 2022

Target:Dec 10, 2022

🏁

Project Closed

Project has been completed and closed

Allsup's Whitney NT1 is a New Construction project located at 810 S. Colorado Street, Whitney, TX 64105 in Whitney, Texas. The project has an estimated value of $800K covering 6,277 sq ft. BW GAS & CONVENIENCE REAL ESTATE LLC is the property owner and TK Architects Inc. is the design firm of record. The project was registered with TDLR on June 1, 2022.

❓Frequently Asked Questions

What is Allsup's Whitney NT1?

Allsup's Whitney NT1 is a new construction project at 810 S. Colorado Street in Whitney, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: All Architectural, Structural, MEP work for new construction

Is Allsup's Whitney NT1 open in Whitney?

Construction on Allsup's Whitney NT1 is complete — TDLR records show the project passed its required accessibility inspection in Dec 2022. The building is finished and very likely open.

Where is Allsup's Whitney NT1 located?

Allsup's Whitney NT1 is located at 810 S. Colorado Street, Whitney, TX, 64105, in Hill County.

Who is the owner or developer of Allsup's Whitney NT1?

BW GAS & CONVENIENCE REAL ESTATE LLC is the property owner/developer of record for Allsup's Whitney NT1, per its TDLR project registration.

Who is the architect or design firm for Allsup's Whitney NT1?

TK Architects Inc. is the design firm of record for Allsup's Whitney NT1, according to its TDLR filing.

How much does Allsup's Whitney NT1 cost and how big is it?

Allsup's Whitney NT1 has an estimated construction value of $800K and approximately 6,277 square feet (about $127/sqft), based on its TDLR filing.

📋Scope of Work

All Architectural, Structural, MEP work for new construction

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.