Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

DSP Cedar Port Terminal

FM 1405 (Address to be assigned), Baytown, TX 77520, Baytown, TX, 77520

DSP Cedar Port Terminal is a new construction project at FM 1405 (Address to be assigned), Baytown, in Chambers County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $8.2M across about 164,640 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2022024640

$8.2M

Project Value

164,640

Square Feet

$50/sqft

Cost/SqFt

11 months

Duration

Registered:Jul 26, 2022

Start:Sep 1, 2022

Target:Jul 31, 2023

📝

Review Complete

Design review complete, construction may proceed

DSP Cedar Port Terminal is a New Construction project located at FM 1405 (Address to be assigned), Baytown, TX 77520 in Baytown, Texas. The project has an estimated value of $8.2M covering 164,640 sq ft. Dayton Street Partners LLC is the property owner and Power Brown Architecture is the design firm of record. The project was registered with TDLR on July 26, 2022.

❓Frequently Asked Questions

What is DSP Cedar Port Terminal?

DSP Cedar Port Terminal is a new construction project at FM 1405 (Address to be assigned) in Baytown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Shell Freight Terminal / Distribution Center Warehouse. No Tenant / Interior Fit Out.

Is DSP Cedar Port Terminal open in Baytown?

DSP Cedar Port Terminal is currently under construction in Baytown, TX. Its current TDLR status is "Review Complete".

Where is DSP Cedar Port Terminal located?

DSP Cedar Port Terminal is located at FM 1405 (Address to be assigned), Baytown, TX, 77520, in Chambers County.

Who is the owner or developer of DSP Cedar Port Terminal?

Dayton Street Partners LLC is the property owner/developer of record for DSP Cedar Port Terminal, per its TDLR project registration.

Who is the architect or design firm for DSP Cedar Port Terminal?

Power Brown Architecture is the design firm of record for DSP Cedar Port Terminal, according to its TDLR filing.

How much does DSP Cedar Port Terminal cost and how big is it?

DSP Cedar Port Terminal has an estimated construction value of $8.2M and approximately 164,640 square feet (about $50/sqft), based on its TDLR filing.

📋Scope of Work

Shell Freight Terminal / Distribution Center Warehouse. No Tenant / Interior Fit Out.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.