SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 is a renovation/alteration project at 12100 Samsung Blvd., Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2024). The project has an estimated value of $700K across about 1,000 sq ft.
Project has been completed and closed
SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 is a Renovation/Alteration project located at 12100 Samsung Blvd., Austin, TX 78754 in Austin, Texas. The project has an estimated value of $700K covering 1,000 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on December 12, 2022.
SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 is a renovation/alteration project at 12100 Samsung Blvd. in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of new PH3(15%) H2 DVMB in FAB2 Tox/Flam Room. Providing the design for the installation of new process lines from the DVMB to the existing VMBs, approx.. 2,285 linear feet with appurtenances: pneumatic, venturi, purge, and…
Construction on SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 is complete — TDLR records show the project passed its required accessibility inspection in Apr 2024. The building is finished and very likely open.
SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 is located at 12100 Samsung Blvd., Austin, TX, 78754, in Travis County.
Samsung is the property owner/developer of record for SAS GCS Redundancy Projects - FAB2 PH3(15%) H2, per its TDLR project registration.
Fuse Architecture Studio is the design firm of record for SAS GCS Redundancy Projects - FAB2 PH3(15%) H2, according to its TDLR filing.
SAS GCS Redundancy Projects - FAB2 PH3(15%) H2 has an estimated construction value of $700K and approximately 1,000 square feet (about $700/sqft), based on its TDLR filing.
Installation of new PH3(15%) H2 DVMB in FAB2 Tox/Flam Room. Providing the design for the installation of new process lines from the DVMB to the existing VMBs, approx.. 2,285 linear feet with appurtenances: pneumatic, venturi, purge, and PGV.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Dec 12, 2022
Review Complete
Inspection Complete
Closed
Apr 30, 2024
Building permits found at or near this location
1360BR NEW 3 BEDROOM 2 BATH SINGLE FAMILY RESIDENTIAL HOME WITH ATTACHED GARAGE COVERED FRONT PORCH AND REAR PATIO
Home builders loop Ref: 2026-063452 EP ETJ
Express: Foundation repair
New construction in the ETJ SFR
Construct new driveway approach of 17 FT and sidewalk of 24.55 LF ***No final acceptance issued yet Approval attached for DS permits only. Bond 3lue 3onnett Concrete Services- Bond is going to expire in June 042026. This license expiration will expire you DS permits. But will go back to active status again once the license is reactivated. Current bond submit here https://app.smartsheet.com/b/form/cad1e53c88224399979f40df80ef6270.
