Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS GCS Capa Up Install F226-SG05

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS GCS Capa Up Install F226-SG05 is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $645K across about 856 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026015792

$645K

Project Value

856

Square Feet

$754/sqft

Cost/SqFt

4 months

Duration

Registered:Mar 24, 2026

Start:Apr 6, 2026

Target:Jul 31, 2026

📝

Review Complete

Design review complete, construction may proceed

SAS GCS Capa Up Install F226-SG05 is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $645K covering 856 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on March 24, 2026.

❓Frequently Asked Questions

What is SAS GCS Capa Up Install F226-SG05?

SAS GCS Capa Up Install F226-SG05 is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Install QTY x2 new WF6 Gas Cabinets in the Fab2 FSF East Bunker to support QTY x1 new metals (SNNR02) tool for 14k LPV

Is SAS GCS Capa Up Install F226-SG05 open in Austin?

SAS GCS Capa Up Install F226-SG05 is currently under construction in Austin, TX. Its current TDLR status is "Review Complete".

Where is SAS GCS Capa Up Install F226-SG05 located?

SAS GCS Capa Up Install F226-SG05 is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS GCS Capa Up Install F226-SG05?

Samsung is the property owner/developer of record for SAS GCS Capa Up Install F226-SG05, per its TDLR project registration.

Who is the architect or design firm for SAS GCS Capa Up Install F226-SG05?

Fuse Architecture Studio is the design firm of record for SAS GCS Capa Up Install F226-SG05, according to its TDLR filing.

How much does SAS GCS Capa Up Install F226-SG05 cost and how big is it?

SAS GCS Capa Up Install F226-SG05 has an estimated construction value of $645K and approximately 856 square feet (about $754/sqft), based on its TDLR filing.

📋Scope of Work

Install QTY x2 new WF6 Gas Cabinets in the Fab2 FSF East Bunker to support QTY x1 new metals (SNNR02) tool for 14k LPV

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.