SAS GCS Capa Up Install F226-SG03
SAS GCS Capa Up Install F226-SG03 is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.7M across about 13,125 sq ft.
Project Metrics
TDLR #TABS2026015790Review Complete
Design review complete, construction may proceed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78754 (Austin)
One email per change. Unsubscribe in one click. Privacy.
SAS GCS Capa Up Install F226-SG03 is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $1.7M covering 13,125 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on March 24, 2026.
Frequently Asked Questions
What is SAS GCS Capa Up Install F226-SG03?
SAS GCS Capa Up Install F226-SG03 is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Move-in and set eight (8) new TEOS DTLRs, one (1) LVMB, one (1) transfer line from AS-TEOS-01MBCD-C-04, located F2M1 CSF Col. F20
Is SAS GCS Capa Up Install F226-SG03 open in Austin?
SAS GCS Capa Up Install F226-SG03 is currently under construction in Austin, TX. Its current TDLR status is "Review Complete".
Where is SAS GCS Capa Up Install F226-SG03 located?
SAS GCS Capa Up Install F226-SG03 is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.
Who is the owner or developer of SAS GCS Capa Up Install F226-SG03?
Samsung is the property owner/developer of record for SAS GCS Capa Up Install F226-SG03, per its TDLR project registration.
Who is the architect or design firm for SAS GCS Capa Up Install F226-SG03?
Fuse Architecture Studio is the design firm of record for SAS GCS Capa Up Install F226-SG03, according to its TDLR filing.
How much does SAS GCS Capa Up Install F226-SG03 cost and how big is it?
SAS GCS Capa Up Install F226-SG03 has an estimated construction value of $1.7M and approximately 13,125 square feet (about $128/sqft), based on its TDLR filing.
Scope of Work
Move-in and set eight (8) new TEOS DTLRs, one (1) LVMB, one (1) transfer line from AS-TEOS-01MBCD-C-04, located F2M1 CSF Col. F20
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Compliance Timeline
Project Timeline
Filed
Mar 24, 2026
Review Complete
Apr 5, 2026
Inspection Complete
Closed
12d
Review duration
Related Projects
Same Owner
$84.7M totalRelated City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work HVAC change out is in the hallway of the 4th floor of the main office building. No unit number.
NEW RESIDENTIAL IRRIGATION SYSTEM
Installing a new irrigation system
1360BR NEW 3 BEDROOM 2 BATH SINGLE FAMILY RESIDENTIAL HOME WITH ATTACHED GARAGE COVERED FRONT PORCH AND REAR PATIO
Home builders loop Ref: 2026-063452 EP ETJ
Property Owner
Design Firm
Registered Accessibility Specialist
Travis County Economy
Explore Area
Watch all construction in 78754 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.