Funding type
This project is privately funded, on private land for private use.
SAS 2026 Capital Projects - FAB1 ICPMS
12100 Samsung Blvd, Austin, TX, 78754
SAS 2026 Capital Projects - FAB1 ICPMS is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Feb 2027. The project has an estimated value of $810K across about 3,098 sq ft.
- Estimated project value
- $810K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 3,098 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $261/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 4 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
31 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
121 days after the preceding date shown.
Source: TDLR filing
View source record
📰About SAS 2026 Capital Projects - FAB1 ICPMS
Samsung Austin Semiconductor is installing a new Inductively Coupled Plasma Mass Spectrometry (ICPMS) system in the Fab1 acid room (C9) at 12100 Samsung Blvd, Austin, TX 78754. This renovation and alteration project covers 3,098 sq ft and is estimated to cost $810,000.
The project was registered with TDLR in September 2026, and plan review is pending. Construction start is scheduled for October 2026, with completion targeted for February 2027. This timeline represents a scheduled build window of 121 days, which is close to the county median of 98 days for similar renovation and alteration filings in Travis County.
Samsung is the owner of record, and Fuse Architecture Studio is the design firm. The registered accessibility specialist for the project is Mark S Robinson. The project is privately funded on private land for private use.
Project Context and Comparisons
This filing is one of several recent projects associated with Samsung Austin Semiconductor. The estimated cost of $810,000 is above the county median for its type, placing it in the top quarter of similar filings. The cost per square foot is $261, which is above the county median of $103 per square foot. The square footage of 3,098 sq ft is slightly below the county median of 3,800 sq ft for comparable projects.
Fuse Architecture Studio has been involved in six other TDLR-registered projects totaling $12,647,000, including work for other semiconductor and technology firms in the Austin and San Marcos areas. Samsung has six other registered projects totaling $5,631,700, most of which have completed review or are closed. City of Austin permit records show at least 25 permits on file at this street address, with the 25 most recent issued between September 2024 and September 2026. These permits include electrical, building, plumbing, and mechanical work, with declared valuations totaling $9,981,475.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78754 (Austin)
One email per change. Unsubscribe in one click. Privacy.
SAS 2026 Capital Projects - FAB1 ICPMS is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $810K covering 3,098 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on September 29, 2026.
Frequently Asked Questions
When is the project expected to be completed?
Construction start is scheduled for October 2026, and completion is targeted for February 2027.
Who is the design firm for this project?
Fuse Architecture Studio is the design firm of record for this renovation and alteration project.
What is the estimated cost per square foot?
The estimated cost is $810,000 for 3,098 sq ft, resulting in a cost of $261 per square foot.
What is SAS 2026 Capital Projects - FAB1 ICPMS?
SAS 2026 Capital Projects - FAB1 ICPMS is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Install Fab1 ICPMS in the Fab1 acid room (C9) and all necessary utilities, Install HF(49%) remote sampling cabinet in Fab1 acid room (C9)
Is SAS 2026 Capital Projects - FAB1 ICPMS open in Austin?
SAS 2026 Capital Projects - FAB1 ICPMS is still under construction in Austin, TX, with an estimated completion of Feb 2027 according to its TDLR registration.
Where is SAS 2026 Capital Projects - FAB1 ICPMS located?
SAS 2026 Capital Projects - FAB1 ICPMS is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.
Who is the owner or developer of SAS 2026 Capital Projects - FAB1 ICPMS?
Samsung is the property owner/developer of record for SAS 2026 Capital Projects - FAB1 ICPMS, per its TDLR project registration.
Who is the architect or design firm for SAS 2026 Capital Projects - FAB1 ICPMS?
Fuse Architecture Studio is the design firm of record for SAS 2026 Capital Projects - FAB1 ICPMS, according to its TDLR filing.
How much does SAS 2026 Capital Projects - FAB1 ICPMS cost and how big is it?
SAS 2026 Capital Projects - FAB1 ICPMS has an estimated construction value of $810K and approximately 3,098 square feet (about $261/sqft), based on its TDLR filing.
Scope of Work
Install Fab1 ICPMS in the Fab1 acid room (C9) and all necessary utilities, Install HF(49%) remote sampling cabinet in Fab1 acid room (C9)
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
12100 Samsung Blvd, Austin, TX, 78754
Related Projects
Same Owner
$3.3M totalNearby Projects
Within 1 kmRelated City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work hvac change out
NEW RESIDENTIAL IRRIGATION SYSTEM
Replacement of complete existing central heat and air system with or without duct work HVAC change out is in the hallway of the 4th floor of the main office building. No unit number.
Interior remodel existing light manufacturing facility - FAB1 TMAH Replacement - F126-CH01.
Installing a new irrigation system
Watch all construction in 78754 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Austin?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.