Construction complete · Sep 2023🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Petco

2112 SW H K Dodgen Loop, Ste 100, Temple, TX 76540, Temple, TX, 76540

Petco is a renovation/alteration project at 2112 SW H K Dodgen Loop, Ste 100, Temple, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2023). The project has an estimated value of $550K across about 2,417 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023008937

$550K

Project Value

2,417

Square Feet

$228/sqft

Cost/SqFt

3 months

Duration

Registered:Jan 9, 2023

Start:Jun 26, 2023

Target:Sep 15, 2023

🏁

Project Closed

Project has been completed and closed

Petco is a Renovation/Alteration project located at 2112 SW H K Dodgen Loop, Ste 100, Temple, TX 76540 in Temple, Texas. The project has an estimated value of $550K covering 2,417 sq ft. G3C Temple, LLC is the property owner and MG2 Corporation is the design firm of record. The project was registered with TDLR on January 9, 2023.

❓Frequently Asked Questions

What is Petco?

Petco is a renovation/alteration project at 2112 SW H K Dodgen Loop, Ste 100 in Temple, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior remodel of existing Petco - new full service vet clinic . Vet clinic for minor same day procedures, no overnight stays. Expansion of the existing pre-sales and new office.

Is Petco open in Temple?

Construction on Petco is complete — TDLR records show the project passed its required accessibility inspection in Sep 2023. The building is finished and very likely open.

Where is Petco located?

Petco is located at 2112 SW H K Dodgen Loop, Ste 100, Temple, TX, 76540, in Bell County.

Who is the owner or developer of Petco?

G3C Temple, LLC is the property owner/developer of record for Petco, per its TDLR project registration.

Who is the architect or design firm for Petco?

MG2 Corporation is the design firm of record for Petco, according to its TDLR filing.

How much does Petco cost and how big is it?

Petco has an estimated construction value of $550K and approximately 2,417 square feet (about $228/sqft), based on its TDLR filing.

📋Scope of Work

Interior remodel of existing Petco - new full service vet clinic . Vet clinic for minor same day procedures, no overnight stays. Expansion of the existing pre-sales and new office.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.