Construction complete · Jul 2023🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Penske

730 E Trinity Blvd, Grand Prairie, TX 75050, Grand Prairie, TX, 75050

Penske is a renovation/alteration project at 730 E Trinity Blvd, Grand Prairie, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2023). The project has an estimated value of $1.5M across about 9,398 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023016637

$1.5M

Project Value

9,398

Square Feet

$160/sqft

Cost/SqFt

3 months

Duration

Registered:Apr 14, 2023

Start:May 1, 2023

Target:Jul 31, 2023

🏁

Project Closed

Project has been completed and closed

Penske is a Renovation/Alteration project located at 730 E Trinity Blvd, Grand Prairie, TX 75050 in Grand Prairie, Texas. The project has an estimated value of $1.5M covering 9,398 sq ft. PROLOGIS is the property owner and WARE MALCOMB is the design firm of record. The project was registered with TDLR on April 14, 2023.

❓Frequently Asked Questions

What is Penske?

Penske is a renovation/alteration project at 730 E Trinity Blvd in Grand Prairie, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: TENANT IMPROVEMENT COLD STORAGE FREEZER ADDITION IN AN EXISTING COLD STORAGE WAREHOUSE

Is Penske open in Grand Prairie?

Construction on Penske is complete — TDLR records show the project passed its required accessibility inspection in Jul 2023. The building is finished and very likely open.

Where is Penske located?

Penske is located at 730 E Trinity Blvd, Grand Prairie, TX, 75050, in Dallas County.

Who is the owner or developer of Penske?

PROLOGIS is the property owner/developer of record for Penske, per its TDLR project registration.

Who is the architect or design firm for Penske?

WARE MALCOMB is the design firm of record for Penske, according to its TDLR filing.

How much does Penske cost and how big is it?

Penske has an estimated construction value of $1.5M and approximately 9,398 square feet (about $160/sqft), based on its TDLR filing.

📋Scope of Work

TENANT IMPROVEMENT COLD STORAGE FREEZER ADDITION IN AN EXISTING COLD STORAGE WAREHOUSE

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.