Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Dallas Mechanical Group TI

2791 MacArthur Blvd, Lewisville, TX 75067, Lewisville, TX, 75067

Dallas Mechanical Group TI is a new construction project at 2791 MacArthur Blvd, Lewisville, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.5M across about 28,500 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2023019141

$1.5M

Project Value

28,500

Square Feet

$53/sqft

Cost/SqFt

1y 5mo

Duration

Registered:May 15, 2023

Start:Jun 15, 2023

Target:Oct 31, 2024

📝

Review Complete

Design review complete, construction may proceed

Dallas Mechanical Group TI is a New Construction project located at 2791 MacArthur Blvd, Lewisville, TX 75067 in Lewisville, Texas. The project has an estimated value of $1.5M covering 28,500 sq ft. The Realty Associates Fund XII Portfolio, LP is the property owner and RGA Architects, Inc. is the design firm of record. The project was registered with TDLR on May 15, 2023.

❓Frequently Asked Questions

What is Dallas Mechanical Group TI?

Dallas Mechanical Group TI is a new construction project at 2791 MacArthur Blvd in Lewisville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Tenant Finish Out in New Existing Industrial Building

Is Dallas Mechanical Group TI open in Lewisville?

Dallas Mechanical Group TI is currently under construction in Lewisville, TX. Its current TDLR status is "Review Complete".

Where is Dallas Mechanical Group TI located?

Dallas Mechanical Group TI is located at 2791 MacArthur Blvd, Lewisville, TX, 75067, in Denton County.

Who is the owner or developer of Dallas Mechanical Group TI?

The Realty Associates Fund XII Portfolio, LP is the property owner/developer of record for Dallas Mechanical Group TI, per its TDLR project registration.

Who is the architect or design firm for Dallas Mechanical Group TI?

RGA Architects, Inc. is the design firm of record for Dallas Mechanical Group TI, according to its TDLR filing.

How much does Dallas Mechanical Group TI cost and how big is it?

Dallas Mechanical Group TI has an estimated construction value of $1.5M and approximately 28,500 square feet (about $53/sqft), based on its TDLR filing.

📋Scope of Work

New Tenant Finish Out in New Existing Industrial Building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.