Construction complete · Apr 2024🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Caliber Collision

2400 Airport Drive, Wichita Falls, TX 76306, Wichita Falls, TX, 76306

Caliber Collision is a new construction project at 2400 Airport Drive, Wichita Falls, in Wichita County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2024). The project has an estimated value of $1.8M across about 16,345 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023020336

$1.8M

Project Value

16,345

Square Feet

$110/sqft

Cost/SqFt

9 months

Duration

Registered:May 31, 2023

Start:Jul 17, 2023

Target:Apr 26, 2024

🏁

Project Closed

Project has been completed and closed

Caliber Collision is a New Construction project located at 2400 Airport Drive, Wichita Falls, TX 76306 in Wichita Falls, Texas. The project has an estimated value of $1.8M covering 16,345 sq ft. Cross Development is the property owner and NCA Partners-Architecture is the design firm of record. The project was registered with TDLR on May 31, 2023.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a new construction project at 2400 Airport Drive in Wichita Falls, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Automobile repair facility with administration offices. Steel framed metal with prefinished metal panels on shop building and stucco/stone on admin. office portion.

Is Caliber Collision open in Wichita Falls?

Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Apr 2024. The building is finished and very likely open.

Where is Caliber Collision located?

Caliber Collision is located at 2400 Airport Drive, Wichita Falls, TX, 76306, in Wichita County.

Who is the owner or developer of Caliber Collision?

Cross Development is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

NCA Partners-Architecture is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $1.8M and approximately 16,345 square feet (about $110/sqft), based on its TDLR filing.

📋Scope of Work

Automobile repair facility with administration offices. Steel framed metal with prefinished metal panels on shop building and stucco/stone on admin. office portion.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.