Under construction📋Project Registered🔧 Renovation/Alteration💵 This project involves public funds, public land, or is a Federally funded roadway project.

HP Batting Cage Reno

4233 Grassmere Ln, University Park, TX 75205, University Park, TX, 75205

HP Batting Cage Reno is a renovation/alteration project at 4233 Grassmere Ln, University Park, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $115K across about 6,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2024002817

$115K

Project Value

6,000

Square Feet

$19/sqft

Cost/SqFt

4 months

Duration

Registered:Oct 10, 2023

Start:Oct 30, 2023

Target:Mar 5, 2024

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

HP Batting Cage Reno is a Renovation/Alteration project located at 4233 Grassmere Ln, University Park, TX 75205 in University Park, Texas. The project has an estimated value of $115K covering 6,000 sq ft. HP ISD - Jason Wink is the property owner and Stantec Architecture Inc. is the design firm of record. The project was registered with TDLR on October 10, 2023.

❓Frequently Asked Questions

What is HP Batting Cage Reno?

HP Batting Cage Reno is a renovation/alteration project at 4233 Grassmere Ln in University Park, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Replace roofing, lighting, and exterior wall panels.

Is HP Batting Cage Reno open in University Park?

HP Batting Cage Reno is currently under construction in University Park, TX. Its current TDLR status is "Project Registered".

Where is HP Batting Cage Reno located?

HP Batting Cage Reno is located at 4233 Grassmere Ln, University Park, TX, 75205, in Dallas County.

Who is the owner or developer of HP Batting Cage Reno?

HP ISD - Jason Wink is the property owner/developer of record for HP Batting Cage Reno, per its TDLR project registration.

Who is the architect or design firm for HP Batting Cage Reno?

Stantec Architecture Inc. is the design firm of record for HP Batting Cage Reno, according to its TDLR filing.

How much does HP Batting Cage Reno cost and how big is it?

HP Batting Cage Reno has an estimated construction value of $115K and approximately 6,000 square feet (about $19/sqft), based on its TDLR filing.

📋Scope of Work

Replace roofing, lighting, and exterior wall panels.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.