Taylor MS Add & Reno
Taylor MS Add & Reno is a renovation/alteration project at 304 Carlos G Parker Blvd NW, Taylor, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2024). The project has an estimated value of $7.0M across about 107,574 sq ft.
📊Project Metrics
TDLR #TABS2024004072Project Closed
Project has been completed and closed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 76574 (Taylor)
One email per change. Unsubscribe in one click. Privacy.
Taylor MS Add & Reno is a Renovation/Alteration project located at 304 Carlos G Parker Blvd NW, Taylor, TX 76574 in Taylor, Texas. The project has an estimated value of $7.0M covering 107,574 sq ft. Taylor ISD - Lance Weidler is the property owner and Stantec Architecture Inc. is the design firm of record. The project was registered with TDLR on October 26, 2023.
❓Frequently Asked Questions
What is Taylor MS Add & Reno?
Taylor MS Add & Reno is a renovation/alteration project at 304 Carlos G Parker Blvd NW in Taylor, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New addition with administration area, clinic, and dance room. Renovation of existing administration area, improve courtyard drainage, remove existing portables.
Is Taylor MS Add & Reno open in Taylor?
Construction on Taylor MS Add & Reno is complete — TDLR records show the project passed its required accessibility inspection in Oct 2024. The building is finished and very likely open.
Where is Taylor MS Add & Reno located?
Taylor MS Add & Reno is located at 304 Carlos G Parker Blvd NW, Taylor, TX, 76574, in Williamson County.
Who is the owner or developer of Taylor MS Add & Reno?
Taylor ISD - Lance Weidler is the property owner/developer of record for Taylor MS Add & Reno, per its TDLR project registration.
Who is the architect or design firm for Taylor MS Add & Reno?
Stantec Architecture Inc. is the design firm of record for Taylor MS Add & Reno, according to its TDLR filing.
How much does Taylor MS Add & Reno cost and how big is it?
Taylor MS Add & Reno has an estimated construction value of $7.0M and approximately 107,574 square feet (about $65/sqft), based on its TDLR filing.
📋Scope of Work
New addition with administration area, clinic, and dance room. Renovation of existing administration area, improve courtyard drainage, remove existing portables.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Oct 26, 2023
Review Complete
Inspection Complete
Closed
Oct 31, 2024
🔗Related Projects
👤Same Owner
$47.0M total📄Related City Permits
Building permits found at or near this location
(Gross Peter) - INSTALLATION OF CIRCUIT FOR ELEC. VEHICLE CHARGING STATION - ESIP
CHILDS 39-90606 - Install new _6.8__kW rooftop solar system to existing residential only using backfed breaker.
39-90606 - Childs - Disconnect/reconnect power to tie in PV component and upgrading MSP to 200 Amps. 200 amp Main Breaker. Upgrading revenue meter to 200 Amps.
225amp meter base and exterior panel replacement. Electrical provider is Austin Energy.
Replacement of complete existing central heat and air system with or without duct work LIKE FOR LIKE: 3 Ton Vertical Heat Pump System
Property Owner
Design Firm
Registered Accessibility Specialist
Williamson County Economy
Explore Area
Watch all construction in 76574 (Taylor)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.