Alcon Conner Center R&D Office
Alcon Conner Center R&D Office is a renovation/alteration project at 6201 South Freeway, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2025). The project has an estimated value of $3.1M across about 15,000 sq ft.
📊Project Metrics
TDLR #TABS2024010748Project Closed
Project has been completed and closed
Alcon Conner Center R&D Office is a Renovation/Alteration project located at 6201 South Freeway, Fort Worth, TX 76134 in Fort Worth, Texas. The project has an estimated value of $3.1M covering 15,000 sq ft. Alcon is the property owner and BOKA POWELL is the design firm of record. The project was registered with TDLR on February 2, 2024.
❓Frequently Asked Questions
What is Alcon Conner Center R&D Office?
Alcon Conner Center R&D Office is a renovation/alteration project at 6201 South Freeway in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Office renovation with removal of existing ceiling and ductwork to expose the existing structure above. A new break area, replacement of monumental stair, new balcony, and new offices.
Is Alcon Conner Center R&D Office open in Fort Worth?
Construction on Alcon Conner Center R&D Office is complete — TDLR records show the project passed its required accessibility inspection in May 2025. The building is finished and very likely open.
Where is Alcon Conner Center R&D Office located?
Alcon Conner Center R&D Office is located at 6201 South Freeway, Fort Worth, TX, 76134, in Tarrant County.
Who is the owner or developer of Alcon Conner Center R&D Office?
Alcon is the property owner/developer of record for Alcon Conner Center R&D Office, per its TDLR project registration.
Who is the architect or design firm for Alcon Conner Center R&D Office?
BOKA POWELL is the design firm of record for Alcon Conner Center R&D Office, according to its TDLR filing.
How much does Alcon Conner Center R&D Office cost and how big is it?
Alcon Conner Center R&D Office has an estimated construction value of $3.1M and approximately 15,000 square feet (about $210/sqft), based on its TDLR filing.
📋Scope of Work
Office renovation with removal of existing ceiling and ductwork to expose the existing structure above. A new break area, replacement of monumental stair, new balcony, and new offices.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Feb 2, 2024
Review Complete
Inspection Complete
Closed
May 1, 2025