Additive Machine Center & Heat Treat is a renovation/alteration project at 1902 W Freeway St, Grand Prairie, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $4.3M across about 9,375 sq ft.
Design review complete, construction may proceed
Additive Machine Center & Heat Treat is a Renovation/Alteration project located at 1902 W Freeway St, Grand Prairie, TX 75051 in Grand Prairie, Texas. The project has an estimated value of $4.3M covering 9,375 sq ft. Lockheed Martin is the property owner and Burns & McDonnell Engineering Co. is the design firm of record. The project was registered with TDLR on February 8, 2024.
Additive Machine Center & Heat Treat is a renovation/alteration project at 1902 W Freeway St in Grand Prairie, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Prepare the existing 9,375sqft paint shop area for the Additive Machine Center.
Additive Machine Center & Heat Treat is currently under construction in Grand Prairie, TX. Its current TDLR status is "Review Complete".
Additive Machine Center & Heat Treat is located at 1902 W Freeway St, Grand Prairie, TX, 75051, in Dallas County.
Lockheed Martin is the property owner/developer of record for Additive Machine Center & Heat Treat, per its TDLR project registration.
Burns & McDonnell Engineering Co. is the design firm of record for Additive Machine Center & Heat Treat, according to its TDLR filing.
Additive Machine Center & Heat Treat has an estimated construction value of $4.3M and approximately 9,375 square feet (about $459/sqft), based on its TDLR filing.
Prepare the existing 9,375sqft paint shop area for the Additive Machine Center.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Feb 8, 2024
Review Complete
Feb 8, 2024
Inspection Complete
Closed
