New Hope Bldg. 3 Spec Suite is a renovation/alteration project at 2105 Scottsdale Dr. Bldg. 3, Ste. 300, Cedar Park, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2024). The project has an estimated value of $815K across about 149,429 sq ft.
Project has been completed and closed
New Hope Bldg. 3 Spec Suite is a Renovation/Alteration project located at 2105 Scottsdale Dr. Bldg. 3, Ste. 300, Cedar Park, TX 78641 in Cedar Park, Texas. The project has an estimated value of $815K covering 149,429 sq ft. Riverside Resources is the property owner and S. Tipton Studio is the design firm of record. The project was registered with TDLR on February 14, 2024.
New Hope Bldg. 3 Spec Suite is a renovation/alteration project at 2105 Scottsdale Dr. Bldg. 3, Ste. 300 in Cedar Park, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: First time finish out to create office and warehouse space in existing shell space.
Construction on New Hope Bldg. 3 Spec Suite is complete — TDLR records show the project passed its required accessibility inspection in Jun 2024. The building is finished and very likely open.
New Hope Bldg. 3 Spec Suite is located at 2105 Scottsdale Dr. Bldg. 3, Ste. 300, Cedar Park, TX, 78641, in Williamson County.
Riverside Resources is the property owner/developer of record for New Hope Bldg. 3 Spec Suite, per its TDLR project registration.
S. Tipton Studio is the design firm of record for New Hope Bldg. 3 Spec Suite, according to its TDLR filing.
New Hope Bldg. 3 Spec Suite has an estimated construction value of $815K and approximately 149,429 square feet (about $5/sqft), based on its TDLR filing.
First time finish out to create office and warehouse space in existing shell space.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Feb 14, 2024
Review Complete
Inspection Complete
Closed
Jun 10, 2024
Building permits found at or near this location
Replacement of an existing water heater
1) Remove load bearing walls. 2) Relocate an existing approximately 21 in x 21 in x 60 in 4-ton air-conditioning unit from its current location to the attic space remove old ductworks and install new ductworks throughout the house. 3) Relocate a tankless water heater to the attic. 4) Relocate washer plumbing hookups approximately 5 feet into the garage area. 5) Convert a previously converted garage room back to its original garage use. 6) Addition of rear covered patio and trellis.
1) Remove load bearing walls. 2) Relocate an existing approximately 21 in x 21 in x 60 in 4-ton air-conditioning unit from its current location to the attic space remove old ductworks and install new ductworks throughout the house. 3) Relocate a tankless water heater to the attic. 4) Relocate washer plumbing hookups approximately 5 feet into the garage area. 5) Convert a previously converted garage room back to its original garage use. 6) Addition of rear covered patio and trellis.
1) Remove load bearing walls. 2) Relocate an existing approximately 21 in x 21 in x 60 in 4-ton air-conditioning unit from its current location to the attic space remove old ductworks and install new ductworks throughout the house. 3) Relocate a tankless water heater to the attic. 4) Relocate washer plumbing hookups approximately 5 feet into the garage area. 5) Convert a previously converted garage room back to its original garage use. 6) Addition of rear covered patio and trellis.
1) Remove load bearing walls. 2) Relocate an existing approximately 21 in x 21 in x 60 in 4-ton air-conditioning unit from its current location to the attic space remove old ductworks and install new ductworks throughout the house. 3) Relocate a tankless water heater to the attic. 4) Relocate washer plumbing hookups approximately 5 feet into the garage area. 5) Convert a previously converted garage room back to its original garage use. 6) Addition of rear covered patio and trellis.
