Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Gypsum Processing Mill Replacement

1 USG Rd., Sweetwater, TX 79556, Sweetwater, TX, 79556

Gypsum Processing Mill Replacement is a new construction project at 1 USG Rd., Sweetwater, in Nolan County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $25.0M across about 38,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2024015817

$25.0M

Project Value

38,000

Square Feet

$658/sqft

Cost/SqFt

1y 3mo

Duration

Registered:Apr 10, 2024

Start:Aug 1, 2024

Target:Oct 31, 2025

📝

Review Complete

Design review complete, construction may proceed

Gypsum Processing Mill Replacement is a New Construction project located at 1 USG Rd., Sweetwater, TX 79556 in Sweetwater, Texas. The project has an estimated value of $25.0M covering 38,000 sq ft. United States Gypsum Company is the property owner and Parkhill is the design firm of record. The project was registered with TDLR on April 10, 2024.

❓Frequently Asked Questions

What is Gypsum Processing Mill Replacement?

Gypsum Processing Mill Replacement is a new construction project at 1 USG Rd. in Sweetwater, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construct a new gypsum processing mill (approximately 38,000 sqft) to replace the aging existing mill.

Is Gypsum Processing Mill Replacement open in Sweetwater?

Gypsum Processing Mill Replacement is currently under construction in Sweetwater, TX. Its current TDLR status is "Review Complete".

Where is Gypsum Processing Mill Replacement located?

Gypsum Processing Mill Replacement is located at 1 USG Rd., Sweetwater, TX, 79556, in Nolan County.

Who is the owner or developer of Gypsum Processing Mill Replacement?

United States Gypsum Company is the property owner/developer of record for Gypsum Processing Mill Replacement, per its TDLR project registration.

Who is the architect or design firm for Gypsum Processing Mill Replacement?

Parkhill is the design firm of record for Gypsum Processing Mill Replacement, according to its TDLR filing.

How much does Gypsum Processing Mill Replacement cost and how big is it?

Gypsum Processing Mill Replacement has an estimated construction value of $25.0M and approximately 38,000 square feet (about $658/sqft), based on its TDLR filing.

📋Scope of Work

Construct a new gypsum processing mill (approximately 38,000 sqft) to replace the aging existing mill.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.