UTSA Phase 3 Classrooms DC
UTSA Phase 3 Classrooms DC is a renovation/alteration project at 501 W. Cesar E. Chavez Blvd., San Antonio, TX 7820, San Antonio, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2025). The project has an estimated value of $119K across about 5,670 sq ft.
📊Project Metrics
TDLR #TABS2024016731Project Closed
Project has been completed and closed
UTSA Phase 3 Classrooms DC is a Renovation/Alteration project located at 501 W. Cesar E. Chavez Blvd., San Antonio, TX 7820, San Antonio, TX 78249 in San Antonio, Texas. The project has an estimated value of $119K covering 5,670 sq ft. UTSA is the property owner and Chesney Morales Partners is the design firm of record. The project was registered with TDLR on April 22, 2024.
❓Frequently Asked Questions
What is UTSA Phase 3 Classrooms DC?
UTSA Phase 3 Classrooms DC is a renovation/alteration project at 501 W. Cesar E. Chavez Blvd., San Antonio, TX 7820 in San Antonio, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 4 classrooms- remove existing ceiling mounted projector and install Unistrut above ceiling for new ceiling mounted projector with existing infrastructure.
Is UTSA Phase 3 Classrooms DC open in San Antonio?
Construction on UTSA Phase 3 Classrooms DC is complete — TDLR records show the project passed its required accessibility inspection in Jun 2025. The building is finished and very likely open.
Where is UTSA Phase 3 Classrooms DC located?
UTSA Phase 3 Classrooms DC is located at 501 W. Cesar E. Chavez Blvd., San Antonio, TX 7820, San Antonio, TX, 78249, in Bexar County.
Who is the owner or developer of UTSA Phase 3 Classrooms DC?
UTSA is the property owner/developer of record for UTSA Phase 3 Classrooms DC, per its TDLR project registration.
Who is the architect or design firm for UTSA Phase 3 Classrooms DC?
Chesney Morales Partners is the design firm of record for UTSA Phase 3 Classrooms DC, according to its TDLR filing.
How much does UTSA Phase 3 Classrooms DC cost and how big is it?
UTSA Phase 3 Classrooms DC has an estimated construction value of $119K and approximately 5,670 square feet (about $21/sqft), based on its TDLR filing.
📋Scope of Work
4 classrooms- remove existing ceiling mounted projector and install Unistrut above ceiling for new ceiling mounted projector with existing infrastructure.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Apr 22, 2024
Review Complete
Inspection Complete
Closed
Jun 16, 2025