Dallas PandA Split
Dallas PandA Split is a renovation/alteration project at 2300 Beckleymead Avenue, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $700K across about 15,966 sq ft.
📊Project Metrics
TDLR #TABS2024017994Review Complete
Design review complete, construction may proceed
Dallas PandA Split is a Renovation/Alteration project located at 2300 Beckleymead Avenue, Dallas, TX 75232 in Dallas, Texas. The project has an estimated value of $700K covering 15,966 sq ft. The Home Depot is the property owner and Macgregor Associates is the design firm of record. The project was registered with TDLR on May 7, 2024.
❓Frequently Asked Questions
What is Dallas PandA Split?
Dallas PandA Split is a renovation/alteration project at 2300 Beckleymead Avenue in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Reinforce structural roof joists. Provide power and conduit to new control panels. Install prefabricated barriers to prevent access to underside of new conveyors. Relocate existing overhead fans.
Is Dallas PandA Split open in Dallas?
Dallas PandA Split is currently under construction in Dallas, TX. Its current TDLR status is "Review Complete".
Where is Dallas PandA Split located?
Dallas PandA Split is located at 2300 Beckleymead Avenue, Dallas, TX, 75232, in Dallas County.
Who is the owner or developer of Dallas PandA Split?
The Home Depot is the property owner/developer of record for Dallas PandA Split, per its TDLR project registration.
Who is the architect or design firm for Dallas PandA Split?
Macgregor Associates is the design firm of record for Dallas PandA Split, according to its TDLR filing.
How much does Dallas PandA Split cost and how big is it?
Dallas PandA Split has an estimated construction value of $700K and approximately 15,966 square feet (about $44/sqft), based on its TDLR filing.
📋Scope of Work
Reinforce structural roof joists. Provide power and conduit to new control panels. Install prefabricated barriers to prevent access to underside of new conveyors. Relocate existing overhead fans.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
May 7, 2024
Review Complete
May 7, 2024
Inspection Complete
Closed