Construction complete · Jan 2025🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Sterling Custom Sheet Metal

27112 FM 2978, Magnolia, TX 77354, Magnolia, TX, 77354

Sterling Custom Sheet Metal is a new construction project at 27112 FM 2978, Magnolia, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2025). The project has an estimated value of $600K across about 25,200 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024019631

$600K

Project Value

25,200

Square Feet

$24/sqft

Cost/SqFt

6 months

Duration

Registered:May 30, 2024

Start:Jul 1, 2024

Target:Jan 1, 2025

🏁

Project Closed

Project has been completed and closed

Sterling Custom Sheet Metal is a New Construction project located at 27112 FM 2978, Magnolia, TX 77354 in Magnolia, Texas. The project has an estimated value of $600K covering 25,200 sq ft. Sterling Kidd Combs is the property owner and PEAR STUDIO LLC is the design firm of record. The project was registered with TDLR on May 30, 2024.

❓Frequently Asked Questions

What is Sterling Custom Sheet Metal?

Sterling Custom Sheet Metal is a new construction project at 27112 FM 2978 in Magnolia, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 25,2000 sq ft. 2 NEW FREESTANDING METAL BUILDINGS FOR MANUFACTURING.

Is Sterling Custom Sheet Metal open in Magnolia?

Construction on Sterling Custom Sheet Metal is complete — TDLR records show the project passed its required accessibility inspection in Jan 2025. The building is finished and very likely open.

Where is Sterling Custom Sheet Metal located?

Sterling Custom Sheet Metal is located at 27112 FM 2978, Magnolia, TX, 77354, in Montgomery County.

Who is the owner or developer of Sterling Custom Sheet Metal?

Sterling Kidd Combs is the property owner/developer of record for Sterling Custom Sheet Metal, per its TDLR project registration.

Who is the architect or design firm for Sterling Custom Sheet Metal?

PEAR STUDIO LLC is the design firm of record for Sterling Custom Sheet Metal, according to its TDLR filing.

How much does Sterling Custom Sheet Metal cost and how big is it?

Sterling Custom Sheet Metal has an estimated construction value of $600K and approximately 25,200 square feet (about $24/sqft), based on its TDLR filing.

📋Scope of Work

25,2000 sq ft. 2 NEW FREESTANDING METAL BUILDINGS FOR MANUFACTURING.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.