Construction complete · Feb 2025🏁Project Closed🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Wilsonart Adhesives

10601 NW HK Dodgen Loop, Temple, TX 76504, Temple, TX, 76504

Wilsonart Adhesives is a additions to existing building project at 10601 NW HK Dodgen Loop, Temple, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2025). The project has an estimated value of $1.0M across about 9,350 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024020145

$1.0M

Project Value

9,350

Square Feet

$107/sqft

Cost/SqFt

8 months

Duration

Registered:Jun 5, 2024

Start:Jul 1, 2024

Target:Feb 28, 2025

🏁

Project Closed

Project has been completed and closed

Wilsonart Adhesives is a Additions to Existing Building project located at 10601 NW HK Dodgen Loop, Temple, TX 76504 in Temple, Texas. The project has an estimated value of $1.0M covering 9,350 sq ft. Wilsonart International is the property owner and Garcia Architects is the design firm of record. The project was registered with TDLR on June 5, 2024.

❓Frequently Asked Questions

What is Wilsonart Adhesives?

Wilsonart Adhesives is a additions to existing building project at 10601 NW HK Dodgen Loop in Temple, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition to existing manufacturing building to add storage and loading docks.

Is Wilsonart Adhesives open in Temple?

Construction on Wilsonart Adhesives is complete — TDLR records show the project passed its required accessibility inspection in Feb 2025. The building is finished and very likely open.

Where is Wilsonart Adhesives located?

Wilsonart Adhesives is located at 10601 NW HK Dodgen Loop, Temple, TX, 76504, in Bell County.

Who is the owner or developer of Wilsonart Adhesives?

Wilsonart International is the property owner/developer of record for Wilsonart Adhesives, per its TDLR project registration.

Who is the architect or design firm for Wilsonart Adhesives?

Garcia Architects is the design firm of record for Wilsonart Adhesives, according to its TDLR filing.

How much does Wilsonart Adhesives cost and how big is it?

Wilsonart Adhesives has an estimated construction value of $1.0M and approximately 9,350 square feet (about $107/sqft), based on its TDLR filing.

📋Scope of Work

Addition to existing manufacturing building to add storage and loading docks.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.