City of Smithville Innovation Center
City of Smithville Innovation Center is a new construction project at 400 Fawcett St., Smithville, in Bastrop County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2026). The project has an estimated value of $800K across about 3,870 sq ft.
📊Project Metrics
TDLR #TABS2024020406Project Closed
Project has been completed and closed
City of Smithville Innovation Center is a New Construction project located at 400 Fawcett St., Smithville, TX 78957 in Smithville, Texas. The project has an estimated value of $800K covering 3,870 sq ft. City of Smithville is the property owner and Cutright & Prihoda, Inc. is the design firm of record. The project was registered with TDLR on June 10, 2024.
❓Frequently Asked Questions
What is City of Smithville Innovation Center?
City of Smithville Innovation Center is a new construction project at 400 Fawcett St. in Smithville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: new pre-engineered metal building, concrete slab, with training rooms, offices, and restrooms.
Is City of Smithville Innovation Center open in Smithville?
Construction on City of Smithville Innovation Center is complete — TDLR records show the project passed its required accessibility inspection in Feb 2026. The building is finished and very likely open.
Where is City of Smithville Innovation Center located?
City of Smithville Innovation Center is located at 400 Fawcett St., Smithville, TX, 78957, in Bastrop County.
Who is the owner or developer of City of Smithville Innovation Center?
City of Smithville is the property owner/developer of record for City of Smithville Innovation Center, per its TDLR project registration.
Who is the architect or design firm for City of Smithville Innovation Center?
Cutright & Prihoda, Inc. is the design firm of record for City of Smithville Innovation Center, according to its TDLR filing.
How much does City of Smithville Innovation Center cost and how big is it?
City of Smithville Innovation Center has an estimated construction value of $800K and approximately 3,870 square feet (about $207/sqft), based on its TDLR filing.
📋Scope of Work
new pre-engineered metal building, concrete slab, with training rooms, offices, and restrooms.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 10, 2024
Review Complete
Inspection Complete
Nov 1, 2025
Closed
Feb 10, 2026
🔗Related Projects
👤Same Owner
$5.7M total📄Related City Permits
Building permits found at or near this location
Installation of a 240 sf (8 ft x 30 ft) pre-fabricated aluminum covered walkway at the Eastside campus entrance to provide weather protection from the drop-off point to the building. Scope includes laying out and placing 6 concrete footings to support structural columns. All work to be completed per engineering specifications.
Gas line to New Generator
Installation of solar light poles around the existing playground area to increase security. 2026 015673 DA - Approved
Extend existing circuits from existing starline busway to 8) rows of benches in 5th floor lab. This scope of work was discussed and approved by Hyatt Dunn.
Replacement of complete existing central heat and air system with or without duct work LIKE FOR LIKE: 3 ton horizontal gas system
Property Owner
Design Firm
Registered Accessibility Specialist
Bastrop County Economy
Explore Area
Find Professionals
Need a contractor for this project?
Browse verified general contractors active in Bastrop County
Find General Contractors in Bastrop