Under constructionReview Complete Renovation/Alteration This project is privately funded, on private land for private use.

PacSun

2602 Preston Road, Frisco, TX 75034, Frisco, TX, 75034

PacSun is a renovation/alteration project at 2602 Preston Road, Frisco, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $400K across about 3,925 sq ft.

Construction50%

Project Metrics

TDLR #TABS2024020534

$400K

Project Value

3,925

Square Feet

$102/sqft

Cost/SqFt

3 months

Duration

Registered:Jun 11, 2024

Start:Feb 17, 2025

Target:May 17, 2025

Review Complete

Design review complete, construction may proceed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 75034 (Frisco)

One email per change. Unsubscribe in one click. Privacy.

PacSun is a Renovation/Alteration project located at 2602 Preston Road, Frisco, TX 75034 in Frisco, Texas. The project has an estimated value of $400K covering 3,925 sq ft. STONEBRIAR MALL LLC is the property owner and Sargenti Architects is the design firm of record. The project was registered with TDLR on June 11, 2024.

Frequently Asked Questions

What is PacSun?

PacSun is a renovation/alteration project at 2602 Preston Road in Frisco, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Remodel of existing PacSun. New finishes, fixtures, and lighting in the sales area only. New finishes at the storefront and portion of storefront glazing to be replaced with a wall.

Is PacSun open in Frisco?

PacSun is currently under construction in Frisco, TX. Its current TDLR status is "Review Complete".

Where is PacSun located?

PacSun is located at 2602 Preston Road, Frisco, TX, 75034, in Collin County.

Who is the owner or developer of PacSun?

STONEBRIAR MALL LLC is the property owner/developer of record for PacSun, per its TDLR project registration.

Who is the architect or design firm for PacSun?

Sargenti Architects is the design firm of record for PacSun, according to its TDLR filing.

How much does PacSun cost and how big is it?

PacSun has an estimated construction value of $400K and approximately 3,925 square feet (about $102/sqft), based on its TDLR filing.

Scope of Work

Remodel of existing PacSun. New finishes, fixtures, and lighting in the sales area only. New finishes at the storefront and portion of storefront glazing to be replaced with a wall.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.