Construction complete · Oct 2024🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

FabriPrint

350 E. Royal Lane Suite 110, Irving, TX 75039, Irving, TX, 75039

FabriPrint is a renovation/alteration project at 350 E. Royal Lane Suite 110, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2024). The project has an estimated value of $300K across about 12,388 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024023334

$300K

Project Value

12,388

Square Feet

$24/sqft

Cost/SqFt

3 months

Duration

Registered:Jul 18, 2024

Start:Jul 30, 2024

Target:Oct 31, 2024

🏁

Project Closed

Project has been completed and closed

FabriPrint is a Renovation/Alteration project located at 350 E. Royal Lane Suite 110, Irving, TX 75039 in Irving, Texas. The project has an estimated value of $300K covering 12,388 sq ft. Capital Commercial Investments is the property owner and DRAWbridge is the design firm of record. The project was registered with TDLR on July 18, 2024.

❓Frequently Asked Questions

What is FabriPrint?

FabriPrint is a renovation/alteration project at 350 E. Royal Lane Suite 110 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior Tenant Finish Out

Is FabriPrint open in Irving?

Construction on FabriPrint is complete — TDLR records show the project passed its required accessibility inspection in Oct 2024. The building is finished and very likely open.

Where is FabriPrint located?

FabriPrint is located at 350 E. Royal Lane Suite 110, Irving, TX, 75039, in Dallas County.

Who is the owner or developer of FabriPrint?

Capital Commercial Investments is the property owner/developer of record for FabriPrint, per its TDLR project registration.

Who is the architect or design firm for FabriPrint?

DRAWbridge is the design firm of record for FabriPrint, according to its TDLR filing.

How much does FabriPrint cost and how big is it?

FabriPrint has an estimated construction value of $300K and approximately 12,388 square feet (about $24/sqft), based on its TDLR filing.

📋Scope of Work

Interior Tenant Finish Out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.