Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Silverado ESA Spec #3

325 Hancock Drive, Hudson Oaks, TX 76087, Hudson Oaks, TX, 76087

Silverado ESA Spec #3 is a new construction project at 325 Hancock Drive, Hudson Oaks, in Parker County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $3.2M across about 31,752 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025000115

$3.2M

Project Value

31,752

Square Feet

$100/sqft

Cost/SqFt

1 year

Duration

Registered:Sep 3, 2024

Start:Oct 1, 2024

Target:Oct 1, 2025

📝

Review Complete

Design review complete, construction may proceed

Silverado ESA Spec #3 is a New Construction project located at 325 Hancock Drive, Hudson Oaks, TX 76087 in Hudson Oaks, Texas. The project has an estimated value of $3.2M covering 31,752 sq ft. Silverado ESA, Inc. is the property owner and Steven L. Crouch, Architect is the design firm of record. The project was registered with TDLR on September 3, 2024.

❓Frequently Asked Questions

What is Silverado ESA Spec #3?

Silverado ESA Spec #3 is a new construction project at 325 Hancock Drive in Hudson Oaks, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New concrete tilt-wall shell warehouse

Is Silverado ESA Spec #3 open in Hudson Oaks?

Silverado ESA Spec #3 is currently under construction in Hudson Oaks, TX. Its current TDLR status is "Review Complete".

Where is Silverado ESA Spec #3 located?

Silverado ESA Spec #3 is located at 325 Hancock Drive, Hudson Oaks, TX, 76087, in Parker County.

Who is the owner or developer of Silverado ESA Spec #3?

Silverado ESA, Inc. is the property owner/developer of record for Silverado ESA Spec #3, per its TDLR project registration.

Who is the architect or design firm for Silverado ESA Spec #3?

Steven L. Crouch, Architect is the design firm of record for Silverado ESA Spec #3, according to its TDLR filing.

How much does Silverado ESA Spec #3 cost and how big is it?

Silverado ESA Spec #3 has an estimated construction value of $3.2M and approximately 31,752 square feet (about $100/sqft), based on its TDLR filing.

📋Scope of Work

New concrete tilt-wall shell warehouse

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.