Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Welding Lab Expansion

5151 Regent Boulevard, Irving, TX 75063, Irving, TX, 75063

Welding Lab Expansion is a renovation/alteration project at 5151 Regent Boulevard, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $950K across about 8,677 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025000873

$950K

Project Value

8,677

Square Feet

$109/sqft

Cost/SqFt

3 months

Duration

Registered:Sep 12, 2024

Start:Nov 15, 2024

Target:Feb 7, 2025

📝

Review Complete

Design review complete, construction may proceed

Welding Lab Expansion is a Renovation/Alteration project located at 5151 Regent Boulevard, Irving, TX 75063 in Irving, Texas. The project has an estimated value of $950K covering 8,677 sq ft. Universal Technical Institute of Northern Texas, LLC. is the property owner and BHA Studio is the design firm of record. The project was registered with TDLR on September 12, 2024.

❓Frequently Asked Questions

What is Welding Lab Expansion?

Welding Lab Expansion is a renovation/alteration project at 5151 Regent Boulevard in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior finish-out

Is Welding Lab Expansion open in Irving?

Welding Lab Expansion is currently under construction in Irving, TX. Its current TDLR status is "Review Complete".

Where is Welding Lab Expansion located?

Welding Lab Expansion is located at 5151 Regent Boulevard, Irving, TX, 75063, in Dallas County.

Who is the owner or developer of Welding Lab Expansion?

Universal Technical Institute of Northern Texas, LLC. is the property owner/developer of record for Welding Lab Expansion, per its TDLR project registration.

Who is the architect or design firm for Welding Lab Expansion?

BHA Studio is the design firm of record for Welding Lab Expansion, according to its TDLR filing.

How much does Welding Lab Expansion cost and how big is it?

Welding Lab Expansion has an estimated construction value of $950K and approximately 8,677 square feet (about $109/sqft), based on its TDLR filing.

📋Scope of Work

Interior finish-out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.