Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

BUILDING FACILITIES (SHELL ONLY)

3605 ESPER DRIVE, El Paso, TX 79936, El Paso, TX, 79936

BUILDING FACILITIES (SHELL ONLY) is a new construction project at 3605 ESPER DRIVE, El Paso, in El Paso County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $200K across about 8,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025001081

$200K

Project Value

8,000

Square Feet

$25/sqft

Cost/SqFt

4 months

Duration

Registered:Sep 16, 2024

Start:Oct 1, 2024

Target:Feb 3, 2025

📝

Review Complete

Design review complete, construction may proceed

BUILDING FACILITIES (SHELL ONLY) is a New Construction project located at 3605 ESPER DRIVE, El Paso, TX 79936 in El Paso, Texas. The project has an estimated value of $200K covering 8,000 sq ft. GONZALO CADENA is the property owner and REY ENGINEERING is the design firm of record. The project was registered with TDLR on September 16, 2024.

❓Frequently Asked Questions

What is BUILDING FACILITIES (SHELL ONLY)?

BUILDING FACILITIES (SHELL ONLY) is a new construction project at 3605 ESPER DRIVE in El Paso, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Shell Only

Is BUILDING FACILITIES (SHELL ONLY) open in El Paso?

BUILDING FACILITIES (SHELL ONLY) is currently under construction in El Paso, TX. Its current TDLR status is "Review Complete".

Where is BUILDING FACILITIES (SHELL ONLY) located?

BUILDING FACILITIES (SHELL ONLY) is located at 3605 ESPER DRIVE, El Paso, TX, 79936, in El Paso County.

Who is the owner or developer of BUILDING FACILITIES (SHELL ONLY)?

GONZALO CADENA is the property owner/developer of record for BUILDING FACILITIES (SHELL ONLY), per its TDLR project registration.

Who is the architect or design firm for BUILDING FACILITIES (SHELL ONLY)?

REY ENGINEERING is the design firm of record for BUILDING FACILITIES (SHELL ONLY), according to its TDLR filing.

How much does BUILDING FACILITIES (SHELL ONLY) cost and how big is it?

BUILDING FACILITIES (SHELL ONLY) has an estimated construction value of $200K and approximately 8,000 square feet (about $25/sqft), based on its TDLR filing.

📋Scope of Work

Shell Only

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.