Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Select Tilt wall panel repair.

8904 N Royal Ln., Irving, TX 75063, Irving, TX, 75063

Select Tilt wall panel repair. is a renovation/alteration project at 8904 N Royal Ln., Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $100K across about 2,500 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025012179

$100K

Project Value

2,500

Square Feet

$40/sqft

Cost/SqFt

5 months

Duration

Registered:Feb 18, 2025

Start:Mar 1, 2025

Target:Jul 31, 2025

📝

Review Complete

Design review complete, construction may proceed

Select Tilt wall panel repair. is a Renovation/Alteration project located at 8904 N Royal Ln., Irving, TX 75063 in Irving, Texas. The project has an estimated value of $100K covering 2,500 sq ft. Prologis is the property owner and Childress Engineering Services, Inc. is the design firm of record. The project was registered with TDLR on February 18, 2025.

❓Frequently Asked Questions

What is Select Tilt wall panel repair.?

Select Tilt wall panel repair. is a renovation/alteration project at 8904 N Royal Ln. in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Repair damaged concrete tilt wall panels due to impact.

Is Select Tilt wall panel repair. open in Irving?

Select Tilt wall panel repair. is currently under construction in Irving, TX. Its current TDLR status is "Review Complete".

Where is Select Tilt wall panel repair. located?

Select Tilt wall panel repair. is located at 8904 N Royal Ln., Irving, TX, 75063, in Dallas County.

Who is the owner or developer of Select Tilt wall panel repair.?

Prologis is the property owner/developer of record for Select Tilt wall panel repair., per its TDLR project registration.

Who is the architect or design firm for Select Tilt wall panel repair.?

Childress Engineering Services, Inc. is the design firm of record for Select Tilt wall panel repair., according to its TDLR filing.

How much does Select Tilt wall panel repair. cost and how big is it?

Select Tilt wall panel repair. has an estimated construction value of $100K and approximately 2,500 square feet (about $40/sqft), based on its TDLR filing.

📋Scope of Work

Repair damaged concrete tilt wall panels due to impact.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.