Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Spur Materials

Lot 11 Mission Industrial Drive, Floresville, TX, 78144

Spur Materials is a new construction project at Lot 11 Mission Industrial Drive, Floresville, in Wilson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $4.0M across about 568,087 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025012970

$4.0M

Project Value

568,087

Square Feet

$7/sqft

Cost/SqFt

1 year

Duration

Registered:Feb 27, 2025

Start:Apr 1, 2025

Target:Apr 1, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Spur Materials is a New Construction project located at Lot 11 Mission Industrial Drive in Floresville, Texas. The project has an estimated value of $4.0M covering 568,087 sq ft. Spur Materials LLC is the property owner and Foresite Group is the design firm of record. The project was registered with TDLR on February 27, 2025.

❓Frequently Asked Questions

What is Spur Materials?

Spur Materials is a new construction project at Lot 11 Mission Industrial Drive in Floresville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of a concrete cement milling plant with associated paving and earthwork. (568,087 SQ FT)

Is Spur Materials open in Floresville?

Spur Materials is currently under construction in Floresville, TX. Its current TDLR status is "Project Registered".

Where is Spur Materials located?

Spur Materials is located at Lot 11 Mission Industrial Drive, Floresville, TX, 78144, in Wilson County.

Who is the owner or developer of Spur Materials?

Spur Materials LLC is the property owner/developer of record for Spur Materials, per its TDLR project registration.

Who is the architect or design firm for Spur Materials?

Foresite Group is the design firm of record for Spur Materials, according to its TDLR filing.

How much does Spur Materials cost and how big is it?

Spur Materials has an estimated construction value of $4.0M and approximately 568,087 square feet (about $7/sqft), based on its TDLR filing.

📋Scope of Work

Construction of a concrete cement milling plant with associated paving and earthwork. (568,087 SQ FT)

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.