Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Scrubber-Polishing

12010 General Milton Dr, Laredo, TX 78045, Laredo, TX, 78045

Scrubber-Polishing is a new construction project at 12010 General Milton Dr, Laredo, in Webb County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $3.5M across about 745 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025013131

$3.5M

Project Value

745

Square Feet

$4.70K/sqft

Cost/SqFt

5 months

Duration

Registered:Mar 3, 2025

Start:Jun 2, 2025

Target:Oct 31, 2025

📝

Review Complete

Design review complete, construction may proceed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 78045 (Laredo)

One email per change. Unsubscribe in one click. Privacy.

Scrubber-Polishing is a New Construction project located at 12010 General Milton Dr, Laredo, TX 78045 in Laredo, Texas. The project has an estimated value of $3.5M covering 745 sq ft. Midwest Sterilization Corportaion is the property owner. The project was registered with TDLR on March 3, 2025.

❓Frequently Asked Questions

What is Scrubber-Polishing?

Scrubber-Polishing is a new construction project at 12010 General Milton Dr in Laredo, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The project contains architectural scope required to support mechanical and process upgrades to the sterilization operations. New building with new fans and electrical work will be installed.

Is Scrubber-Polishing open in Laredo?

Scrubber-Polishing is currently under construction in Laredo, TX. Its current TDLR status is "Review Complete".

Where is Scrubber-Polishing located?

Scrubber-Polishing is located at 12010 General Milton Dr, Laredo, TX, 78045, in Webb County.

Who is the owner or developer of Scrubber-Polishing?

Midwest Sterilization Corportaion is the property owner/developer of record for Scrubber-Polishing, per its TDLR project registration.

How much does Scrubber-Polishing cost and how big is it?

Scrubber-Polishing has an estimated construction value of $3.5M and approximately 745 square feet (about $4.70K/sqft), based on its TDLR filing.

📋Scope of Work

The project contains architectural scope required to support mechanical and process upgrades to the sterilization operations. New building with new fans and electrical work will be installed.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.