Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

CAM Glass & Mirror

778 Van Zandt County Road 2106, Canton, TX, 75103

CAM Glass & Mirror is a new construction project at 778 Van Zandt County Road 2106, Canton, in Van Zandt County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $275K across about 5,037 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025014755

$275K

Project Value

5,037

Square Feet

$55/sqft

Cost/SqFt

10 months

Duration

Registered:Mar 20, 2025

Start:Apr 14, 2025

Target:Jan 30, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

CAM Glass & Mirror is a New Construction project located at 778 Van Zandt County Road 2106 in Canton, Texas. The project has an estimated value of $275K covering 5,037 sq ft. C.A.M. Constructors & Fabrication, LLC is the property owner and MAULDIN ARCHITECTS PLLC is the design firm of record. The project was registered with TDLR on March 20, 2025.

❓Frequently Asked Questions

What is CAM Glass & Mirror?

CAM Glass & Mirror is a new construction project at 778 Van Zandt County Road 2106 in Canton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New warehouse building for glass supplier

Is CAM Glass & Mirror open in Canton?

CAM Glass & Mirror is currently under construction in Canton, TX. Its current TDLR status is "Project Registered".

Where is CAM Glass & Mirror located?

CAM Glass & Mirror is located at 778 Van Zandt County Road 2106, Canton, TX, 75103, in Van Zandt County.

Who is the owner or developer of CAM Glass & Mirror?

C.A.M. Constructors & Fabrication, LLC is the property owner/developer of record for CAM Glass & Mirror, per its TDLR project registration.

Who is the architect or design firm for CAM Glass & Mirror?

MAULDIN ARCHITECTS PLLC is the design firm of record for CAM Glass & Mirror, according to its TDLR filing.

How much does CAM Glass & Mirror cost and how big is it?

CAM Glass & Mirror has an estimated construction value of $275K and approximately 5,037 square feet (about $55/sqft), based on its TDLR filing.

📋Scope of Work

New warehouse building for glass supplier

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.