Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Union Tech Manufacturing

2323 McDaniel Dr., Carrollton, TX 75006, Carrollton, TX, 75006

Union Tech Manufacturing is a renovation/alteration project at 2323 McDaniel Dr., Carrollton, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $9.0M across about 222,175 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025019069

$9.0M

Project Value

222,175

Square Feet

$41/sqft

Cost/SqFt

7 months

Duration

Registered:May 15, 2025

Start:Jun 16, 2025

Target:Dec 31, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Union Tech Manufacturing is a Renovation/Alteration project located at 2323 McDaniel Dr., Carrollton, TX 75006 in Carrollton, Texas. The project has an estimated value of $9.0M covering 222,175 sq ft. Prologis LP and Affiliates is the property owner and NCA Partners is the design firm of record. The project was registered with TDLR on May 15, 2025.

❓Frequently Asked Questions

What is Union Tech Manufacturing?

Union Tech Manufacturing is a renovation/alteration project at 2323 McDaniel Dr. in Carrollton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: RENOVATION AND ALTERATION OF AN EXISTING 222,175-SQUARE-FOOT WAREHOUSE FACILITY FOR CONVERSION INTO A MANUFACTURING, FABRICATION, AND STORAGE FACILITY.

Is Union Tech Manufacturing open in Carrollton?

Union Tech Manufacturing is currently under construction in Carrollton, TX. Its current TDLR status is "Project Registered".

Where is Union Tech Manufacturing located?

Union Tech Manufacturing is located at 2323 McDaniel Dr., Carrollton, TX, 75006, in Dallas County.

Who is the owner or developer of Union Tech Manufacturing?

Prologis LP and Affiliates is the property owner/developer of record for Union Tech Manufacturing, per its TDLR project registration.

Who is the architect or design firm for Union Tech Manufacturing?

NCA Partners is the design firm of record for Union Tech Manufacturing, according to its TDLR filing.

How much does Union Tech Manufacturing cost and how big is it?

Union Tech Manufacturing has an estimated construction value of $9.0M and approximately 222,175 square feet (about $41/sqft), based on its TDLR filing.

📋Scope of Work

RENOVATION AND ALTERATION OF AN EXISTING 222,175-SQUARE-FOOT WAREHOUSE FACILITY FOR CONVERSION INTO A MANUFACTURING, FABRICATION, AND STORAGE FACILITY.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.