Construction complete · Jan 2026🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

ICAT

8840 Cypress Water Blvd Suite 325, Dallas, TX 75019, Dallas, TX, 75019

ICAT is a renovation/alteration project at 8840 Cypress Water Blvd Suite 325, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2026). The project has an estimated value of $422K across about 6,901 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2025019863

$422K

Project Value

6,901

Square Feet

$61/sqft

Cost/SqFt

6 months

Duration

Registered:May 28, 2025

Start:May 27, 2025

Target:Nov 27, 2025

🏁

Project Closed

Project has been completed and closed

ICAT is a Renovation/Alteration project located at 8840 Cypress Water Blvd Suite 325, Dallas, TX 75019 in Dallas, Texas. The project has an estimated value of $422K covering 6,901 sq ft. Billingsley is the property owner and idGroup is the design firm of record. The project was registered with TDLR on May 28, 2025.

❓Frequently Asked Questions

What is ICAT?

ICAT is a renovation/alteration project at 8840 Cypress Water Blvd Suite 325 in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: THE SCOPE OF THIS PROJECT IS A NON-STRUCTURAL INTERIOR FINISH-OUT IN AN EXISTING SINGLE FLOOR SUITE. SCOPE INCLUDES HVAC, ELECTRICAL, PLUMBING.

Is ICAT open in Dallas?

Construction on ICAT is complete — TDLR records show the project passed its required accessibility inspection in Jan 2026. The building is finished and very likely open.

Where is ICAT located?

ICAT is located at 8840 Cypress Water Blvd Suite 325, Dallas, TX, 75019, in Dallas County.

Who is the owner or developer of ICAT?

Billingsley is the property owner/developer of record for ICAT, per its TDLR project registration.

Who is the architect or design firm for ICAT?

idGroup is the design firm of record for ICAT, according to its TDLR filing.

How much does ICAT cost and how big is it?

ICAT has an estimated construction value of $422K and approximately 6,901 square feet (about $61/sqft), based on its TDLR filing.

📋Scope of Work

THE SCOPE OF THIS PROJECT IS A NON-STRUCTURAL INTERIOR FINISH-OUT IN AN EXISTING SINGLE FLOOR SUITE. SCOPE INCLUDES HVAC, ELECTRICAL, PLUMBING.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.