Opening ~Jul 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Mayday Manufacturing Addition

3100 Jim Christal Rd, Denton, TX 78216, Denton, TX, 78216

Mayday Manufacturing Addition is a new construction project at 3100 Jim Christal Rd, Denton, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jul 2026. The project has an estimated value of $8.0M across about 44,259 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025020555

$8.0M

Project Value

44,259

Square Feet

$181/sqft

Cost/SqFt

1 year

Duration

Registered:Jun 4, 2025

Start:Jul 1, 2025

Target:Jul 1, 2026

Remaining:7 days

📝

Review Complete

Design review complete, construction may proceed

Mayday Manufacturing Addition is a New Construction project located at 3100 Jim Christal Rd, Denton, TX 78216 in Denton, Texas. The project has an estimated value of $8.0M covering 44,259 sq ft. Mayday Manufacturing - Doug Wolf is the property owner and XA Collective is the design firm of record. The project was registered with TDLR on June 4, 2025.

❓Frequently Asked Questions

What is Mayday Manufacturing Addition?

Mayday Manufacturing Addition is a new construction project at 3100 Jim Christal Rd in Denton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The PROJECT CONSISTS OF A 44,259 SQ.FT. ADDITION TO AN EXISTING FACTORY INDUSTRIAL WAREHOUSE(F-2)/OFFICE BUILDING.

Is Mayday Manufacturing Addition open in Denton?

Mayday Manufacturing Addition is still under construction in Denton, TX, with an estimated completion of Jul 2026 according to its TDLR registration.

Where is Mayday Manufacturing Addition located?

Mayday Manufacturing Addition is located at 3100 Jim Christal Rd, Denton, TX, 78216, in Denton County.

Who is the owner or developer of Mayday Manufacturing Addition?

Mayday Manufacturing - Doug Wolf is the property owner/developer of record for Mayday Manufacturing Addition, per its TDLR project registration.

Who is the architect or design firm for Mayday Manufacturing Addition?

XA Collective is the design firm of record for Mayday Manufacturing Addition, according to its TDLR filing.

How much does Mayday Manufacturing Addition cost and how big is it?

Mayday Manufacturing Addition has an estimated construction value of $8.0M and approximately 44,259 square feet (about $181/sqft), based on its TDLR filing.

📋Scope of Work

The PROJECT CONSISTS OF A 44,259 SQ.FT. ADDITION TO AN EXISTING FACTORY INDUSTRIAL WAREHOUSE(F-2)/OFFICE BUILDING.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.