Construction complete · May 2026✅Inspection Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

FRAMO

3002 E Thirteenth St, Laporte, TX 77571, Laporte, TX, 77571

FRAMO is a renovation/alteration project at 3002 E Thirteenth St, Laporte, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2026). The project has an estimated value of $900K across about 5,032 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2025021692

$900K

Project Value

5,032

Square Feet

$179/sqft

Cost/SqFt

3 months

Duration

Registered:Jun 19, 2025

Start:Jun 27, 2025

Target:Sep 12, 2025

✅

Inspection Complete

Final inspection completed, awaiting project closure

FRAMO is a Renovation/Alteration project located at 3002 E Thirteenth St, Laporte, TX 77571 in Laporte, Texas. The project has an estimated value of $900K covering 5,032 sq ft. Framo Houston Inc is the property owner and Method Architecture is the design firm of record. The project was registered with TDLR on June 19, 2025.

❓Frequently Asked Questions

What is FRAMO?

FRAMO is a renovation/alteration project at 3002 E Thirteenth St in Laporte, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Additional Parking, Paving with office trailer, warehouse remodel (5032sqft) in an existing building to include new equipment for the washbay

Is FRAMO open in Laporte?

Construction on FRAMO is complete — TDLR records show the project passed its required accessibility inspection in May 2026. The building is finished and very likely open.

Where is FRAMO located?

FRAMO is located at 3002 E Thirteenth St, Laporte, TX, 77571, in Harris County.

Who is the owner or developer of FRAMO?

Framo Houston Inc is the property owner/developer of record for FRAMO, per its TDLR project registration.

Who is the architect or design firm for FRAMO?

Method Architecture is the design firm of record for FRAMO, according to its TDLR filing.

How much does FRAMO cost and how big is it?

FRAMO has an estimated construction value of $900K and approximately 5,032 square feet (about $179/sqft), based on its TDLR filing.

📋Scope of Work

Additional Parking, Paving with office trailer, warehouse remodel (5032sqft) in an existing building to include new equipment for the washbay

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.