Opening ~Nov 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

AER Manufacturing

TBD Wiley Post Road, Carrollton, TX 76210, Carrollton, TX, 76210

AER Manufacturing is a new construction project at TBD Wiley Post Road, Carrollton, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Nov 2026. The project has an estimated value of $17.3M across about 154,388 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025025349

$17.3M

Project Value

154,388

Square Feet

$112/sqft

Cost/SqFt

1y 3mo

Duration

Registered:Aug 7, 2025

Start:Aug 18, 2025

Target:Nov 1, 2026

Remaining:109 days

📝

Review Complete

Design review complete, construction may proceed

AER Manufacturing is a New Construction project located at TBD Wiley Post Road, Carrollton, TX 76210 in Carrollton, Texas. The project has an estimated value of $17.3M covering 154,388 sq ft. AER Manufacturing, LP is the property owner and Parkway C&A LP is the design firm of record. The project was registered with TDLR on August 7, 2025.

❓Frequently Asked Questions

What is AER Manufacturing?

AER Manufacturing is a new construction project at TBD Wiley Post Road in Carrollton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Demolition of existing parking lot and construction of a new 154,388 SF building, Type B & S-2 occupancy, Type lllB Construction

Is AER Manufacturing open in Carrollton?

AER Manufacturing is still under construction in Carrollton, TX, with an estimated completion of Nov 2026 according to its TDLR registration.

Where is AER Manufacturing located?

AER Manufacturing is located at TBD Wiley Post Road, Carrollton, TX, 76210, in Dallas County.

Who is the owner or developer of AER Manufacturing?

AER Manufacturing, LP is the property owner/developer of record for AER Manufacturing, per its TDLR project registration.

Who is the architect or design firm for AER Manufacturing?

Parkway C&A LP is the design firm of record for AER Manufacturing, according to its TDLR filing.

How much does AER Manufacturing cost and how big is it?

AER Manufacturing has an estimated construction value of $17.3M and approximately 154,388 square feet (about $112/sqft), based on its TDLR filing.

📋Scope of Work

Demolition of existing parking lot and construction of a new 154,388 SF building, Type B & S-2 occupancy, Type lllB Construction

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.