Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Maverick Metals

705 Rogart Drive, Austin, TX 78669, Austin, TX, 78669

Maverick Metals is a renovation/alteration project at 705 Rogart Drive, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $300K across about 10,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026001195

$300K

Project Value

10,000

Square Feet

$30/sqft

Cost/SqFt

2 months

Duration

Registered:Sep 18, 2025

Start:Nov 3, 2025

Target:Jan 12, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Maverick Metals is a Renovation/Alteration project located at 705 Rogart Drive, Austin, TX 78669 in Austin, Texas. The project has an estimated value of $300K covering 10,000 sq ft. Eric Herrera is the property owner and Element 5 Architecture is the design firm of record. The project was registered with TDLR on September 18, 2025.

❓Frequently Asked Questions

What is Maverick Metals?

Maverick Metals is a renovation/alteration project at 705 Rogart Drive in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior finish out inside an existing warm shell space for offices and a BSL-1 Lab. No exterior site work is proposed in this scope of work.

Is Maverick Metals open in Austin?

Maverick Metals is currently under construction in Austin, TX. Its current TDLR status is "Project Registered".

Where is Maverick Metals located?

Maverick Metals is located at 705 Rogart Drive, Austin, TX, 78669, in Travis County.

Who is the owner or developer of Maverick Metals?

Eric Herrera is the property owner/developer of record for Maverick Metals, per its TDLR project registration.

Who is the architect or design firm for Maverick Metals?

Element 5 Architecture is the design firm of record for Maverick Metals, according to its TDLR filing.

How much does Maverick Metals cost and how big is it?

Maverick Metals has an estimated construction value of $300K and approximately 10,000 square feet (about $30/sqft), based on its TDLR filing.

📋Scope of Work

Interior finish out inside an existing warm shell space for offices and a BSL-1 Lab. No exterior site work is proposed in this scope of work.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.